Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bedford
If your Bedford gate sags, drags, or swings crooked, the fix usually comes down to one thing: the hinge post has moved. That’s the short answer. Our Gate Parts & Welding team has solved this exact problem on hundreds of Bedford driveways, and we can usually be on site the same day you call. Most hinge and weld repairs in Bedford run between $150 and $480, and we’ll quote the exact price before any work starts. Call (817) 580-8494 and a live person answers, day or night.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Parts & Welding Company
Bedford is a city of established neighborhoods. The homes off Forest Ridge Drive, along Cummings Drive, and throughout the 76021 and 76022 zip codes were built to last, and their gates were too. But a 35-year-old gate hanging on an original cedar post is now fighting Tarrant County clay, and that’s a fight the post loses a little more each season. We’ve worked on enough Bedford gates to know exactly what’s happening before we even pull into the driveway: the post has rotated, the hinges have wallowed out, and the gate is dragging on the concrete.
Ironworks Gate Co. was founded in 1984, and we’ve spent more than four decades doing one thing: gates. Not fences-that-happen-to-have-gates, not general contracting with a welding torch in the truck. Gate Parts & Welding is our trade. Bedford homeowners call us because we identify the actual failure instead of selling a replacement gate the customer doesn’t need. Every completed job carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no argument.
Our technicians are background-checked and uniformed, and they work in your side yard the way they’d work in their own mother’s. Victor Salinas leads the crew, and he’s the one who set the standard we still follow on every Bedford job: diagnose honestly, price up front, and stand behind the work. A live person answers our phone 24 hours a day, 7 days a week, which matters when you find your gate hanging by one hinge at 8:00 on a Saturday night.
Our Gate Parts & Welding Services in Bedford
Hinge Replacement
Most Bedford swing gates hang on two or three strap hinges screwed into a cedar 4×4 post. After thirty years of spring rain and August heat, those screws back out and the hinge tears loose, dropping the latch end of the gate onto the drive. We cut away the old hardware, weld heavy-duty strap hinges to the gate frame where needed, and through-bolt the post side so it never pulls free again. Typical hinge replacement in Bedford runs $120 to $280 per hinge, including hardware and labor.
Post Replacement
This is the bread-and-butter call across Bedford’s 1980s subdivisions. The original 4×4 cedar post has heaved and rotated in the expansive black-clay soil, so the gate frame looks twisted when the real problem is the footing. We dig out the old post, set a new pressure-treated or steel post in a 30-inch concrete pier, and rehang the existing gate square to the drive. A full post replacement runs $350 to $750 depending on gate width and whether the gate is automated.
Rail Repair
Clay heave racks gate frames so the latch no longer lines up, and that stress concentrates at the rail-to-stile joints until something cracks or the welds pop. We cut out the failed rail, fishplate or sleeve the connection, and weld it solid. If the gate is on an opener, we’ll re-true the frame so the travel limit switches work cleanly again. Expect $180 to $420 for a typical rail repair in Bedford, including weld prep and touch-up paint.
Custom Welding
Sometimes a Bedford gate just needs a piece that no longer exists. An original 1980s latch bracket that’s been discontinued. A decorative spear that snapped off. A slide gate truck assembly for a track that’s rusted thin. We fabricate replacement parts in-house, match the profile as closely as the metal allows, and weld them in place. Custom welding work starts around $150 for small brackets and runs upward from there; we’ll give you a fixed quote before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
Bedford gates run on every kind of operator, and we’ve kept service training current on nine brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. What that means in practice: when you call about a gate that won’t open, we already know the control board layout, the common failure points, and which parts need to be ordered for a Viking versus a Linear operator. We keep a rolling stock of high-failure components in our trucks, so most Bedford repairs are completed in one visit.
Common Gate Parts & Welding Problems We See in Bedford Homes
- Heaved hinge posts. Bedford’s expansive black-clay soil swells in wet springs and shrinks in dry summers. A 4×4 cedar post set in a shallow footing rotates a little each cycle until the gate visibly sags.
- Latches that no longer line up. When the post moves, the latch bolt misses the strike plate entirely. Homeowners often weld on a longer hasp as a band-aid, but the gate frame keeps twisting until the welds crack at the rail joints.
- Torn hinge screws. Weathered cedar gets soft, the original screws lose bite, and the lower hinge pulls out. That leaves the full gate weight on the upper hinge, which then bends or snaps.
- Slide gates binding in the heat. Summer temperatures regularly exceed 100°F in Bedford. Steel frames expand, the gate grows a fraction of an inch in length, and suddenly the slide gate drags on its track and strips the nylon gear in the opener.
Pricing for Gate Parts & Welding in Bedford, TX
Here’s what Bedford homeowners can expect to pay, as a straight answer:
- Hinge replacement: $120 to $280 per hinge, installed and welded
- Post replacement with new concrete footing: $350 to $750
- Rail repair and re-weld: $180 to $420
- Custom fabrication (brackets, latches, slide tracks): $150 to $900 depending on complexity
- Full gate frame straightening and rehang: $500 to $900
Those ranges cover the labor, hardware, and welding for most Bedford properties. What shifts a job toward the high end is gate width, whether an automated operator is mounted to the gate, and how much of the old framing is too corroded to reuse. We give you the exact number after we see the gate, and that number does not change unless you ask us to add work. Quotes are free. Call (817) 580-8494 to schedule.
We also honor a standing 5% Senior and Veteran discount, a $50 credit on any repair over $250, and a free second opinion if you have a written estimate from another company. The $89 seasonal tune-up applies to automated gates.
We Also Serve Cities Near Bedford
While this page speaks to Bedford homeowners specifically, our crews work throughout the mid-cities. We regularly handle gate repairs in Gateway communities around Bedford including Colleyville, Hurst, Euless, and North Richland Hills. The same pricing, the same written guarantee, and the same live-answer phone line apply.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bedford
Your hinge post is moving with the soil moisture cycle. Bedford sits on Tarrant County’s expansive black clay, which swells when spring rains soak the ground and shrinks through the long, dry summer. As the post leans or rotates, the gate’s latch stile drifts out of alignment, and by August the gate binds on the strike plate or drags on the concrete. The permanent fix is resetting the post in a deeper concrete pier below the shrink-swell zone. That typically runs $350 to $750, and we quote it before we dig. Call (817) 580-8494 and we’ll take a look.
Usually not. In our experience across Bedford’s 1980s subdivisions, the sagging gate is almost always a hinge-post problem, not a frame problem. The original 4×4 cedar post has heaved or the hinge screws have stripped out of the softened wood. We reset the post, through-bolt new hinges, re-weld any cracked rail joints, and your existing gate hangs true again. That repair runs $400 to $800 on average, versus $1,500 to $3,500 for a new custom gate. We’ll tell you honestly which one you actually need.
Yes, and we’ve done it on acreage-style lots along Harwood Road and the larger parcels near the Bedford-Euless line. Solar is the right call where running conduit from the house would mean trenching 200 feet or more. We size the panel and battery to the gate’s weight and daily cycle count, and we mount the operator on a reinforced post so the torque doesn’t twist the frame. BFT and Ghost Controls both make solar-ready openers we’ve installed on Bedford’s wider drive gates. Expect $1,200 to $2,800 installed depending on gate size and hardware.
We do. Slide gate track fails two ways in Bedford: the steel expands in summer heat and binds the rollers, or years of soil movement shift the track out of level and the rollers wear flat on one side. We fabricate and weld replacement track sections, set the rail to grade, and install new rollers sized to the gate’s weight. Typical slide gate track replacement runs $500 to $1,200. We’ll quote the exact number after we take the measurements.
Stand clear of the gate path and wave your hand through the beam while pressing the close button. The gate should stop and reverse immediately. If it keeps closing, the photocell is dead, misaligned, or bypassed. In Bedford’s summer heat, the plastic housing warps and the internal relay can fail, which is a real safety problem if a child or pet is in the gate’s travel path. We test every safety edge and photocell on every gate we touch, and a replacement runs $120 to $250 installed. Call (817) 580-8494 and we’ll check yours.
On a ranch-style home off Harwood Road, our crew found a double swing gate that had dropped nearly two inches at the latch stile. The 4×4 hinge post had rotated in the clay, so we cut the old post footing, reset the post in a 30-inch concrete pier, welded new heavy-duty strap hinges to the gate frame, and reinstalled the existing LiftMaster operator with a fresh safety photocell. The gate now swings true and the opener stops on obstruction.
If your Bedford gate is fighting you, call us at (817) 580-8494. We’ll give you an honest diagnosis, a written price before any work begins, and a 90-day guarantee on everything we do. Victor Salinas still sets the standard on every job: done right, or we come back and do it again.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford and the surrounding mid-cities since 1984.