Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for Southlake Homeowners
A gate motor or opener in Southlake typically costs $850 to $2,400 to replace depending on the type and brand, and most repairs run $190 to $480. We complete the large majority of motor and opener jobs in one visit, with the truck stocked for the brands most common across Southlake, Trophy Club, and Colleyville. If your gate has stopped opening, is grinding, or only moves halfway, Victor Salinas and the Ironworks Gate Co. team can usually be at your driveway the same day. Call (817) 580-8494 and a live person answers, any hour, any day.
What Our Gate Motor & Opener Service Includes
Motor Installation
A failed or outdated gate motor gets replaced with the Best Gate Motor & Opener in Southlake, TX, matched to your gate’s weight, length, and daily cycle count. We handle the full install: removing the old operator, mounting the new motor, setting the travel limits, and tuning the force settings so the gate closes firmly without slamming. Every installation is quoted and agreed before work starts, then backed by our written 90-Day Done Right Promise.
Motor Repair
Often the motor is fine and the problem is a limit switch, a capacitor, a gear, or a control board that has given out. We diagnose the actual fault before reaching for a replacement, which keeps a $1,400 motor from being swapped when a $60 part was the real issue. Most repairs are completed on the first visit because our techs carry OEM parts for nine major opener brands on the truck.
Linear Motor
A linear motor, or linear actuator, is common on sliding gates in Southlake’s longer driveway applications. These units extend and retract a piston to move the gate, and they’re sensitive to alignment and mounting. We set or repair linear operators with attention to ram travel, bracket alignment, and limit adjustment so the gate doesn’t bind at full open or full close.
Slide Motor
Sliding gates use chain-driven or gear-driven slide motors, and a motor that works too hard because of a dragging wheel or dirty track will fail years early. We service the whole sliding assembly, not just the motor: track condition, rollers, chain tension, and end stops. The goal is a slide gate that moves cleanly and quietly, without fighting its own hardware.
Intercom Integration
Many Southlake homes pair a gate motor with a driveway intercom or telephone entry system so a guest can call the house and be buzzed in. We connect new or existing intercom systems to your opener, matching dry-contact or relay inputs so the open command works every time. We also troubleshoot the wiring and relay logic when a gate opens fine from a remote but won’t respond to the intercom.
Battery Backup
Power outages in Tarrant County are rarely long, but they tend to arrive with weather, when you least want to be outside with a manual release key. An Emergency Gate Motor & Opener in Southlake, TX setup with battery backup keeps your gate operational during an outage and prevents the motor from losing its limit settings. We size and install backup batteries for existing openers and include them on new installations when you want the extra layer of reliability.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Motor & Opener
We’re trained and equipped on BFT, Linear, Viking, and Ghost Controls openers, among others, and we carry the parts those systems most commonly need. BFT hydraulic and electromechanical operators show up regularly on Southlake estate gates, and we know their limit-setting and obstruction-sensing quirks well enough to dial them in on the first trip. On Linear actuators and Viking swing operators, the work is usually in the travel limits, the torque settings, or a tired capacitor, and we test each before we call the job done.
Ghost Controls and similar residential openers are popular on lighter ornamental gates, and we regularly see them misadjusted by previous handymen who never worked through the full setup menu. Whether your opener is one of those four, a LiftMaster, a FAAC, a DoorKing, or any other make on the driveway, we can service it. The fix is made right the first visit, whatever brand is mounted on the post.
Signs You Need Gate Motor & Opener Service Right Now
- Gate only opens partway or reverses before fully open. This usually points to a failing limit switch or an obstruction sensor picking up a false signal. Left alone, the motor keeps working against itself and burns out faster than it should.
- Grinding, buzzing, or a humming sound with no movement. A hum without movement often means a capacitor or gear has failed and the motor is stalled. The longer it runs in that state, the more likely a simple part failure becomes a full motor replacement.
- The gate moves slower than it used to. Sluggish movement can mean low voltage, a weak motor, or added friction from worn rollers or hinges. The motor is working harder to do the same job, and that shortens its life measurably.
- Opener responds to the remote only when you’re close. This could be a failing receiver board or antenna, or interference from a new device. We diagnose the radio side as carefully as the mechanical side because the symptom is identical for both.
- You hear the motor running but the gate doesn’t move. A stripped gear, broken chain, or sheared coupling is the usual cause. This is mechanical failure, not an adjustment issue, and it should be fixed before the motor seizes completely.
Our Gate Motor & Opener Process - Step by Step
- 1
Call and talk to a person. You dial (817) 580-8494, and we answer. We ask what the gate is doing, what brand the opener is, and how long the problem has been happening, then schedule a time that works for you.
- 2
On-site diagnosis. Our technician arrives in a stocked truck, runs the gate through its full cycle, and tests voltage at the board, capacitor condition, limit switches, and mechanical load. We find the actual fault and explain it in plain English before quoting any work.
- 3
Upfront price, agreed before work. You get a written quote for the repair or replacement before a single bolt is turned. No hidden fees, no surprise line items, no work you didn’t approve.
- 4
Repair or installation, usually same visit. We carry common OEM parts and motors for nine major brands, so most jobs are finished the same day we diagnose them. Installations and panel upgrades that require ordered parts get a clear timeline.
- 5
Tested, cleaned, and documented. We cycle the gate multiple times, verify the safety edges and obstruction reversal, and clean up the work area. You get a written record of what was done, and the job is covered by the 90-Day Done Right Promise from Ironworks Gate Co.
How Much Does Gate Motor & Opener Cost in Southlake?
A typical Colleyville Gate Motor & Opener replacement in Southlake costs $850 to $2,400 for the motor and installation, with slide motors toward the lower end and heavy swing operators toward the upper end. Gate opener repairs run $190 to $480 for most common faults like capacitors, limit switches, gears, and receiver boards. Intercom integration adds $300 to $900 depending on the equipment and wiring distance, and a battery backup installed with a new or existing opener typically runs $250 to $600.
What moves the price is the weight and length of the gate, the brand of opener, whether the mounting posts are sound, and whether electrical work is needed at the operator. A free estimate covers all of it: we measure the gate, check the existing operator and wiring, and give you a written number before you commit. For an exact quote on your gate, call (817) 580-8494. Estimates are free, and the price we quote is the price you pay.
Gate Motor & Opener Near Southlake - Our Service Area
Ironworks Gate Co. serves Southlake and the surrounding communities, including Trophy Club, North Richland Hills, Bedford, Double Oak, Colleyville, Grapevine, Keller, Flower Mound, Euless, Hurst, and Watauga. Most repairs in Southlake are scheduled within one business day, and emergency calls are answered around the clock. If your gate has quit, call (817) 580-8494 and we’ll get a truck to you. You can also learn more about our work in neighboring cities on our Gate Motor & Opener in Trophy Club and Gate Motor & Opener in North Richland Hills pages, or return to our home page for the full scope of our gate services.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in Southlake
A gate motor and opener is the powered operator that opens and closes your driveway gate automatically, using a remote, keypad, sensor loop, or intercom. It includes the motor itself, the control board, limit switches, and the arm or piston that attaches to the gate. We service, repair, and install our Gate Motor & Opener in Southlake, working on everything from light residential swing gates to heavier estate slide gates.
Most motor repairs are finished the same day, typically in one to two hours, because we carry common parts and motors for nine major brands on the truck. A full motor replacement usually takes two to four hours depending on the mounting and wiring. If we need to order a specialty part or a custom panel, we’ll tell you the timeline before any work is approved.
Replacement motors run $850 to $2,400 installed, while most repairs fall between $190 and $480. Battery backup adds $250 to $600, and intercom integration runs $300 to $900. The best way to get an exact number is to call (817) 580-8494 for a free, written estimate, the price we quote is the price you pay.
Yes. We’re trained and equipped on Viking and Ghost Controls, plus BFT, Linear, LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Whatever brand is on your Southlake gate, we can diagnose and repair it, and we keep OEM parts for the most commonly serviced models on the truck for first-visit fixes.
Yes. A live person answers our phone 24 hours a day, 7 days a week, including holidays. If your gate is stuck open in Southlake, we’ll get there as quickly as the schedule allows, and we’ll quote the repair before any work begins. Call (817) 580-8494 and tell us what the gate is doing, or not doing.
Every job we complete is covered by the 90-Day Done Right Promise: a written, no-hassle guarantee. If something isn’t right within 90 days, we come back and make it right, no paperwork, no arguing. Manufacturer warranties on new motors and parts also apply, and we register those for you at installation.
Clear the area around the gate and the operator, and have your remotes or keypad codes handy so we can test the full system. If the gate is stuck closed, leave it; we’ll bring the tools to move it safely. You don’t need to be a gate expert, we’ll handle testing, diagnosis, and the fix.
Schedule Your Gate Motor & Opener Service in Southlake Today
If your gate is giving you trouble, call (817) 580-8494 for a free, no-obligation estimate. Victor Salinas and the Ironworks Gate Co. team have been doing this work right for over 42 years, and every job is covered in writing by the 90-Day Done Right Promise. We’ll be there when we say, and the price we quote is the price you pay.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake since 1984.