Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Richland Hills
When a gate starts sagging, dragging, or refusing to close, the fix usually comes down to parts and the hands that install them. We handle both. Ironworks Gate Co. has been repairing, rebuilding, and welding gates across North Richland Hills for over 42 years, and our Gate Parts & Welding team knows exactly how this city’s clay soil and older housing stock punish gate hardware. If your hinge post has pulled out of plumb or your rail connections have rotted through, call (817) 580-8494. We’ll diagnose it straight and quote the repair before any work begins.
Why Ironworks Gate Co. Is North Richland Hills’s Preferred Gate Parts & Welding Company
North Richland Hills homeowners don’t want a rotating cast of handymen who show up once and vanish. They want the same crew, the same standard, and a company that plans to be here in another forty years. That’s us. Founded in 1984, Ironworks Gate Co. has built its name on Gate Installation - North Richland Hills, welding craft, and gate automation expertise, and our technicians are background-checked and uniformed on every job. The 90-Day Done Right Promise backs every repair in writing: if it isn’t right, we come back and make it right. No paperwork, no arguing.
We know the difference between a hinge failure and a post that has shifted in the clay. That matters in North Richland Hills, where wet winters and dry summers move the ground under your gate every single year. Our live phone support is answered by a real person 24 hours a day, 7 days a week. When a gate won’t close and your dog is loose or your pool gate won’t latch, you don’t wait until Monday for a callback. You call (817) 580-8494 and you get a person.
Our Gate Parts & Welding Services in North Richland Hills
Hinge Replacement
A hinge that’s worn or pulled loose from the post is the most common gate failure we see in North Richland Hills, especially on the ornamental iron gates hung in the 1980s and 1990s. We don’t just swap a hinge and call it done. We check the post for plumb first. In neighborhoods along Mid-Cities Boulevard and Rufe Snow Drive, a hinge that looks “bad” is often a symptom of a post that shifted in the clay over a wet winter. We weld the new hinge in place where the frame allows, or we fabricate a heavier plate to give the mount more surface area on aged tubing.
Post Replacement
In North Richland Hills, the black clay under Tarrant County expands dramatically when it’s wet and contracts when it’s dry. That movement pulls gate posts out of alignment year after year. We reset posts with deeper concrete footings, typically 30 to 36 inches, and we set the post plumb in both planes before the new concrete cures. On a ranch-style home near Rufe Snow Drive, our crew found a 16-foot ornamental iron swing gate sagging badly after a wet winter. The hinge post had pulled out of plumb in the expanding clay. We reset the post footing with deeper concrete, welded the hinge post back square, and replaced the worn North Richland Hills Liftmaster service operator arm. The gate now swings level and the operator no longer strains.
Rail Repair
Wood privacy gates from the 1970s through the 1990s are everywhere in North Richland Hills, and their horizontal rails rot at the connections. That’s what causes the sag you can’t adjust away with a turnbuckle. We cut out the rotted section and weld a steel bracket, or we replace the rail entirely and re-hang the gate. The result is a gate that swings true and keeps your backyard pool enclosure secure. Most rail repairs are completed in a single visit.
Custom Welding
Not every gate part is sitting on a shelf. When an ornamental iron gate from the early 1980s needs a replacement picket, a curved top rail, or a heavy strap hinge, we fabricate it in-house. Victor Salinas runs our welding team, and he’s built replacement sections that match the original design closely enough that the repair disappears into the gate. Custom welding also covers operator mounting brackets, gate stop fabrication, and reinforcing frames on wide driveway gates that have twisted over decades of use.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We’re trained and equipped on North Richland Hills Gate Motor & Opener systems across nine gate-automation brands, including LiftMaster, FAAC, BFT, Mighty Mule, and Ghost Controls. That means whatever opener is mounted on your North Richland Hills gate, the technician who arrives already knows its wiring, its limits, and its common failure points. For long driveways on acreage properties where solar is the only practical power source, we stock the low-voltage operator arms, batteries, and control boards that keep failing during cloudy stretches. We don’t make you wait for a part to ship from a warehouse. Most repairs are finished on the first visit.
Common Gate Parts & Welding Problems We See in North Richland Hills Homes
- Clay-soil heave tilts the posts: Wet springs swell the ground and push gate posts toward the street. Replacing a hinge without resetting the post is a temporary fix at best. We diagnose the footing before we quote the part.
- Solar openers starving for power: Long rural driveways around North Richland Hills often run solar-only openers because mains power isn’t practical. Low sun stretches leave wide farm gates stuck open or closed. We upgrade panels, batteries, and low-voltage arms.
- Rotted rail connections on 1980s wood gates: The rail-to-stile joints on older privacy gates rot from rain and humidity. Sag follows, and turnbuckles can’t fix wood that’s gone soft. We replace rails and weld steel reinforcing brackets where needed.
- Strained operators on wide gates: A 16-foot ornamental gate is heavy. When the post leans even a few degrees, the opener arm works against the bind and burns out. We reset the post and replace the arm so the operator isn’t fighting the gate.
Pricing for Gate Parts & Welding in North Richland Hills, TX
A hinge replacement in North Richland Hills typically runs $150 to $320 per hinge, depending on the gate’s weight and whether the post needs realignment before the new hinge is welded. Post replacement runs $450 to $900 per post, including the new concrete footing and setting. Rail repair averages $180 to $400, with custom welded steel brackets on the higher end. Custom welding work is quoted by the job: a fabricated hinge plate or reinforcement bracket usually runs $120 to $350, while matching ornamental sections can run higher. We quote every price before any work begins, and you’ll know the final number before a single bolt is turned. Call (817) 580-8494 for a free estimate.
Standing offers for North Richland Hills customers: $50 Off Any Repair Over $250, Free Second Opinion on Any Written Estimate, an $89 Seasonal Tune-Up, and a 5% Senior and Veteran discount, always.
We Also Serve Cities Near North Richland Hills
Beyond North Richland Hills, our crews take gate parts and welding calls in Hurst, Bedford, Colleyville, and Keller. If you’re on the edge of town near the Keller border or down toward Richland Hills, you’re still in our service area. Our Gate Parts & Welding in North Richland Hills team covers the whole Mid-Cities corridor.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Richland Hills
The expansive black clay under Tarrant County absorbs winter moisture and swells, pushing your gate post off vertical. When the ground dries in summer, it contracts and the post settles into a new, tilted position. Gates along the Rufe Snow Drive and Mid-Cities Boulevard corridors lean toward the street for exactly this reason. The permanent fix is resetting the post with a deeper concrete footing rather than pulling the gate back with a turnbuckle every year. Call (817) 580-8494 and we’ll check the post before quoting any hardware.
Most sagging ornamental iron gates can be repaired. The sag usually comes from a worn hinge, a pulled hinge post, or a cracked weld at the rail connection, not a failure of the entire gate. We weld replacement hinges in place, reset the post if it has moved in the clay, and reinforce any cracked rail welds. Replacement is only necessary when the frame tubing itself is rusted through in multiple places.
We carry low-voltage operator arms, solar charge controllers, 12V and 24V batteries, control boards, and photo-eye safety sensors for most solar gate systems. For wide farm gates, we also keep heavy-duty hinge barrels and receiver posts in stock. If your gate sits on acreage off a county road outside the NRH city limits, we’ll bring the parts we need on the first trip. Call (817) 580-8494 and tell us what opener you have; we’ll confirm the part before we dispatch.
We weld. If the gate frame is steel or wrought iron, we weld the hinge barrel directly to the frame and the post plate, exactly the way the original gate was built. Bolt-on hinges are a stopgap on heavy ornamental gates. Victor Salinas does the welding, and the finished hinge gets cleaned, primed, and painted to match.
Yes. Gate operators are required to have functioning safety entrapment protection, typically photo-eye sensors or an active edge, to prevent the gate from closing on a person, pet, or vehicle. A gate without working photocells is a genuine safety hazard. We’ll install and align the photo eyes, test the auto-reverse, and confirm the operator meets current Gate Access Control in North Richland Hills safety standards. Call (817) 580-8494 and we’ll get it scheduled.
Call Ironworks Gate Co. for Gate Parts & Welding in North Richland Hills
A gate that won’t close isn’t something to put off. It’s a security gap, a pool-safety issue, and a daily annoyance. Our Gate Parts & Welding crew works across North Richland Hills, from the older ranch streets off Rufe Snow Drive to the newer acreage properties on the west side. We answer the phone 24/7 with a real person. We quote before we work. And every repair carries the 90-Day Done Right Promise in writing. Call (817) 580-8494 for your free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills with gate repair, welding, and automation expertise since 1984.