Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Colleyville
Gate parts and welding in Colleyville usually come down to one of two problems: a hinge post that has shifted out of square as the clay soil moves, or a 20-year-old operator that has finally given up on a gate it was never sized to run. We handle both. Ironworks Gate Co. has been repairing and rebuilding estate gates across the 76034 area for long enough to know exactly which failures show up on Glade Road, Montclair, and the shared-driveway estates south of Bransford. If your gate drags, sags, or will not close, call (817) 580-8494 and we will get a technician to your Colleyville property fast.
Why Ironworks Gate Co. Is Colleyville’s Preferred Gate Parts & Welding Company
Colleyville is a different kind of gate market than Bedford, Hurst, or Euless. The homes here were built as custom and semi-custom estates during the 1990s and 2000s, and most of them have automated ornamental iron gates spanning 14 to 20 feet. Those gates weigh several hundred pounds, and the soil under their posts is Blackland Prairie clay that expands and contracts with every wet winter and dry summer. That combination creates repeat failures most generalist contractors never learn to diagnose properly. Our team knows that a hinge pin shearing on a Colleyville gate is often not a hinge problem at all. It is a post footing that has moved, and the fix is a re-weld, not a part swap.
We answer the phone with a live person 24 hours a day, seven days a week. No voicemail trees. When you call about a gate on a Colleyville property, you speak to someone who can dispatch a background-checked, uniformed technician to your driveway. Our position is simple: we are the dedicated gate specialists, not a handyman service that also does gates. We will be there when we say, and every job carries a written 90-Day Done Right Promise. If it is not right, we come back and make it right. No arguing, no paperwork.
Key Takeaways
- Colleyville’s clay soil heaves gate posts out of square every seasonal cycle; hinge replacement alone rarely fixes a recurring sag.
- Most Colleyville gate operators are 15 to 25 years old and parts are increasingly discontinued, so repair calls often become replacements.
- We stock common Colleyville gate parts locally and provide free estimates before any work begins.
- Every Colleyville job is protected by a written 90-Day Done Right Promise.
- Call (817) 580-8494 for a live person and same-day dispatch to Colleyville gate sites when it is urgent.
Our Gate Parts & Welding Services in Colleyville
Our Gate Parts & Welding team handles the full scope of Colleyville estate gate work, from hinge replacements on 1990s swing panels to custom welding on cantilever slide gates. Here is how the four most common Colleyville repairs play out.
Hinge Replacement
On a Colleyville swing gate, hinge replacement is rarely as simple as unbolting the old hinge and bolting on a new one. The post has usually shifted, and that is why the hinge failed. We re-square the panel, build or weld a hinge assembly matched to the gate’s weight and swing radius, and set the operator limits so the motor does not fight the geometry on every cycle. If we only replaced the hinge without correcting the post, you would call us again next spring.
Post Replacement
Post replacement in Colleyville almost always involves welding, because the existing posts are typically set in concrete footings dug into expansive clay. When we set a new post, we size the footing for the soil’s seasonal movement and weld the hinge brackets and operator mounts rather than relying on through-bolts that wallow out under repeated loading. The work is done on your property, and we keep the gate operational while the new footing cures so your driveway does not sit open overnight.
Rail Repair
Cantilever slide gates on narrow Colleyville shared driveways put enormous stress on the bottom rail and rollers. We see rail welds crack every summer as the clay contracts and the track shifts. Rail repair here means grinding out the fatigued weld, re-welding with proper penetration, and often reinforcing the rail with a gusset so the same crack does not return in six months. We also check the roller spacing and end stops while we are under the gate, because a rail that cracked once will crack again if the rollers are misaligned.
Custom Welding
When a Colleyville gate has been damaged by a vehicle strike or the original builder used undersized uprights, custom welding is the fix. We fabricate replacement sections, reinforce stressed joints, and weld in new pickets or frame members that match the existing ornamental pattern. Our welders work with the gate in place whenever possible, because removing a 500-pound panel risks further damage to the hinges and operator mounts. The finished weld is ground smooth and finished to blend with the surrounding metal.
Gate Rollers, Latch & Lock
Slide gate rollers seize, latches wear, and locks bind on Colleyville gates exposed to 105-degree summer heat. We replace rollers and tracks, rebuild latch strikes so the gate stops where it should, and install or repair mechanical and electric locks so the gate actually secures when it closes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
We are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule. That range matters in Colleyville because the original estate builders used everything from Apollo and Elite residential models to heavier FAAC and LiftMaster commercial operators on oversized driveways. We stock common parts for these brands, and when the part is discontinued, we know which current-model drivetrain fits the existing gate without gutting your whole system. You should not have to replace a perfectly good gate because an operator component went out of production.
Common Gate Parts & Welding Problems We See in Colleyville Homes
- Heaved hinge posts throwing swing gates out of square. The Blackland Prairie clay under Colleyville expands in wet winters and contracts in summer drought. A 16-foot swing panel rotates downward as the post moves, shearing hinge pins against the post. The fix is a re-welded post footing, not just a new hinge pin.
- Undersized operators on oversized gates. Many Colleyville gates span 14 to 20 feet and weigh 400 to 700 pounds. Residential-grade operators installed in the 1990s were never sized for that load, and they fail in predictable ways: burned-out rack and pinion gears, melted limit switches, fried control boards after freeze-thaw cycles.
- Discontinued Apollo and Elite parts on 20-year-old systems. Estate gates built during Colleyville’s 1990s custom-home boom used Apollo or Elite operators that are now two decades old. Parts are increasingly unavailable, so a simple-sounding repair call often becomes a full drivetrain replacement. We carry current-model replacements and quote the whole job before starting.
- Rail cracks on shared-driveway cantilever gates. Narrow rights-of-way along Colleyville streets force slide gates where a swing gate would not fit. The rollers grind into the bottom track through every drought cycle, and the rail welds fatigue and crack. We weld these rails back and reinforce them so they survive the next summer.
Pricing for Gate Parts & Welding in Colleyville, TX
Hinge replacement on a standard Colleyville ornamental iron swing gate typically runs $285 to $650, depending on the hinge style and whether the post needs re-squaring. Post replacement, including cutting out the old post, setting a new one in a properly sized clay footing, and re-welding the gate hardware, usually falls between $900 and $2,400 for a standard estate entry. Rail repair welding on a cantilever slide gate runs $350 to $950 depending on crack length and whether we fabricate a reinforcement plate. Custom welding projects like picket replacement or frame repair start around $300 and go up from there. Every price is quoted and agreed before any work starts. You will not get an invoice bigger than the estimate. Call (817) 580-8494 for a free written estimate on your Colleyville gate.
We Also Serve Cities Near Colleyville
Beyond Colleyville, our gate parts and welding crews regularly work in Bedford, Hurst, Southlake, and Euless. The soil and gate failures are different in each one, but the standard of work does not change. If your property sits just outside Colleyville city limits, we will still get a technician to you quickly.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Colleyville
Because the clay under the hinge post is moving, not the hinge itself. Colleyville sits on Blackland Prairie-adjacent soil that expands aggressively during wet winters and spring rains, then contracts in summer drought. That seasonal movement shifts the post, which throws the gate out of square and shears hinge pins. A hinge-only repair does not address the post footing, so the problem returns every spring. We correct the post footing with a re-weld and then rebuild the hinge assembly so the gate holds square through the cycle. Call (817) 580-8494 and we will inspect your post before quoting the repair.
Sometimes, but not always. Many Apollo and Elite operators installed during Colleyville’s 1990s buildout are 20 or more years old, and specific parts are discontinued. We keep common replacement components in stock, and we know which current-model drivetrains and limit switch assemblies interchange with the old units. When a repair is no longer practical, we quote a complete operator replacement sized for your gate’s actual weight. You will know the number before we order anything.
We work the gate in sections and keep one side passable. On most Colleyville shared-driveway estates, that means welding the cracked rail in place while the gate remains on the track, with the unwelded end still able to roll enough for vehicles to pass. If the weld needs to cool before we re-mount the gate, we plan the work around the driveway’s traffic pattern and finish the job the same day. A shared driveway does not have to become a blocked driveway.
Usually yes, and we check it as part of the hinge job. When a gate has been dragged off square, the operator’s limit switches often fall out of calibration, and a shifted gate can sit outside the loop detector’s field. If we replace the hinge but do not reset the limits and verify the loop and safety eyes, the gate will either grind at the end of travel or refuse to close on a vehicle. We include that check and reset as part of a proper hinge replacement, not as an add-on surprise.
Weight and wind load. A 14-foot ornamental iron gate on a Colleyville estate commonly weighs 400 to 600 pounds, and a residential-grade operator rated for 300 pounds will burn out its gear train in a season or two. We weld reinforced hinge mounts and a proper operator plate, and we install a drivetrain sized for the actual panel weight rather than the builder’s original spec. If the gate shows stress cracks at the operator mount, we weld in a reinforcement plate before installing the new unit so the gate itself does not fail under the load it was never designed to carry.
Contact Ironworks Gate Co. in Colleyville
If your Colleyville gate is sagging, dragging, or locked up, call (817) 580-8494. We answer around the clock with a live person, and we will schedule a technician for your property fast. Every estimate is free, every price is settled before work begins, and every Colleyville job carries our written 90-Day Done Right Promise. Led by Victor Salinas, Ironworks Gate Co. has been the dedicated gate specialist for North Texas homeowners since 1984. When the gate matters, you call the people who do gates and nothing else.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville and the surrounding North Texas communities.