Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Southlake Homeowners
A new driveway gate in Southlake typically costs between $4,800 and $18,500 installed, depending on the material, width, automation package, and whether we’re working with fresh posts or replacing an existing setup. Most standard swing gate installations take one to two days on site once the gate itself is fabricated and ready. Ironworks Gate Co. has been doing this work since 1984, and Victor Salinas still runs every job the same way: measure twice, weld once, and put the guarantee in writing before we leave.
We are not a general contractor who occasionally hangs a gate. Our Gate Installation in Southlake is the only work we do, from the first core drill to the final limit-switch adjustment. When you call (817) 580-8494, a live person answers, and we’ll schedule a time to walk your driveway with you in Southlake and give you an honest written price before any commitment.
Key Takeaways
- Gate installation in Southlake runs roughly $4,800 to $18,500, with most homeowner driveway gates landing between $6,500 and $12,000.
- We install driveway, pedestrian, sliding, swing, double, and security gates, all covered by the written 90-Day Done Right Promise.
- A live person answers (817) 580-8494 around the clock, and every estimate is free with the price settled before work starts.
What Our Gate Installation Service Includes
Every gate installation we do in Southlake starts with the same question: what is this gate supposed to do for your home? Keep a dog in, keep a car out, close off a long driveway, or simply give the house the entrance it has always deserved. From there, the metal, the motor, and the method follow. Below is how we approach each type of gate we install.
Driveway Gate
A driveway gate is the full-size gate across your vehicle entrance, and in Southlake it is usually the largest single piece of metal on the property. It needs to be heavy enough to hold its shape through North Texas wind gusts, but light enough that the opener works without straining for a decade. We weld square-tube steel frames rather than bolting thin-wall stock together, then skin them in cedar, wrought-iron pickets, or solid steel depending on the look you want. Every driveway gate we install gets hinges rated for at least 50 percent more weight than the finished gate will actually carry.
Pedestrian Gate
A pedestrian gate is the walk-through gate beside or near the driveway, built for people instead of cars. Homeowners often think of it as secondary, but it is the gate your family actually uses most days: grabbing the mail, walking the dog, letting a neighbor through without opening the whole driveway. We build pedestrian gates to match the driveway gate in material and finish so the whole entrance looks like one decision, and we set the posts below the frost line for this region so you won’t get that lean every spring. The latch and closer get the same hardware-grade treatment as anything on a rolling gate.
Sliding Gate
A sliding gate moves horizontally along a track or a cantilever system, and it is the right choice when a driveway slopes up toward the house or when there simply isn’t room for a gate to swing inward. In Southlake we see this often on longer estate driveways where a swing gate would need to push against the grade. We install both track-guided and trackless cantilever sliders, and we pay particular attention to the roller trucks and receiver posts, which are where a poorly built slider shows its problems first. Properly set, a sliding gate should roll with one hand even before the motor goes on.
Swing Gate
A swing gate hinges at the posts and opens the way a door does, either as a single leaf or a pair meeting in the middle. It remains the most common gate style in Southlake because it suits flat or gently sloped driveways and gives you that classic estate look. The two things that determine whether a swing gate lasts are the post footings and the hinge alignment, so we core-drill and set posts in concrete to a depth the soil here demands. We then hang the gate with enough preload adjustment built in that it won’t sag six months after a hot summer.
Double Gate
A double gate is a swing gate in two leaves, and it is the standard answer for a wide driveway where one leaf would be too long and too heavy. Each leaf carries its own hinges and its own share of the load, which means the posts last longer and the openers last longer. We align the two leaves so they meet cleanly at the center without a latching deadbolt fighting itself. If your driveway is wider than about 18 feet, this is generally the configuration we will recommend.
Security Gate
A security gate is designed less for convenience and more for controlling exactly who gets onto the property, and it usually pairs a heavy steel gate with a more serious operator and access system. We build these for Southlake homeowners who want a true perimeter, whether that means a solid steel gate with spear-topped pickets or a steel frame clad to match the house. The automation on a security gate typically includes a heavy-duty operator, a keypad or telephone entry system, and safety edges that stop the gate the instant it meets resistance. This is not the place to save money on a residential-grade opener.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and automate gates using the opener brands we know we can stand behind for years. Our technicians are trained and equipped on nine major gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Southlake homeowner already has a preference, we work with it. When they don’t, we match the operator to the gate weight, cycle count, and how often the gate will be used.
We have put in enough BFT operators to know their hinge-to-operator geometry by heart, and we stock common replacement boards so a warranty call doesn’t mean waiting on a part from Dallas. Linear openers show up on a lot of older Southlake estates, and we retrofit them without ripping out good existing wiring. Viking and Ghost Controls are the two we recommend most often for heavier or solar-powered applications, and we keep their battery and solar kits on the truck. Whatever brand is on the driveway when we arrive, or whatever brand you want when we build new, we can handle it.
Signs You Need Gate Installation Right Now
- The posts are leaning more than a degree or two. In the clay soil around Southlake, water moves the ground every wet-dry cycle. Once a post starts leaning, the gate binds, the opener strains, and the problem accelerates. A new installation with posts set to the right depth and diameter fixes it permanently.
- Your opener is fighting the gate on every cycle. If you can hear the motor laboring or the gate jerks instead of moving smoothly, the gate is either too heavy for the opener or out of square. A properly matched new installation means the opener does a third of the work instead of all of it.
- Rust has moved past surface level into the frame or hinges. North Texas humidity and the occasional ice event hit mild steel hard. When rust blooms along welds or around hinge plates, the structural integrity is compromised, not just the look. A new galvanized or powder-coated gate ends the cycle.
- You’re holding the remote three feet from the receiver to make it work. That’s not a battery problem. It’s usually tired wiring, a degraded receiver, or a gate that has pulled the operator wiring loose at the hinges. New installation rewires everything clean and leaves the remote working from the street.
- Your gate no longer matches the house. This may not be an emergency, but a gate that was built for a 1990s facade on a home you’ve renovated is doing your property no favors. We build gates to match your current architecture, and a gate that fits the house adds more to a Southlake appraisal than one that fights it.
Our Gate Installation Process - Step by Step
We work the same way on a $5,000 pedestrian gate as we do on a $20,000 double-driveway automation project. The process is simple because we have done it thousands of times, and because we would rather explain it once than have you wonder what’s happening in your own driveway.
- 1
Measure and site walk. Victor Salinas or one of our senior technicians comes to your Southlake property, walks the gate line, checks slope, soil, existing posts, power availability, and how the gate needs to interact with the fence and the driveway. We take laser measurements and note any obstacles like gas meters, irrigation lines, or pavers.
- 2
Written estimate. You get a line-item price in writing, with the gate material, hinges, opener, access system, and labor separated so you can see exactly what you’re paying for. The price is agreed before we order a single piece of steel. No allowance games, no “we’ll see how it goes” language.
- 3
Fabrication. We fabricate the gate in our shop, not in your driveway. This means the welds are done downhand, indoors, with proper jigs, then the whole assembly is primed, painted or powder-coated, and cured. When it arrives at your home it is already a finished gate, not a kit of raw material.
- 4
Installation and automation. We set posts to depth, hang the gate to the preload we calculated, square it to within a fraction of an inch, and mount the operator. Then we run through at least 30 full open-close cycles, adjusting limit switches, safety edges, and force settings until the gate moves the way it should.
- 5
Walkthrough and written promise. We walk the gate with you, show you how the manual release works, how to set the keypad codes, and what normal operation sounds and feels like. Before we leave, you have the 90-Day Done Right Promise in writing, and you know exactly what’s covered.
How Much Does Gate Installation Cost in Southlake?
A typical single-leaf swing driveway gate in Southlake runs between $6,500 and $12,000 installed, including the gate itself, posts, hinges, and a standard residential opener. A pedestrian gate without automation usually lands between $1,800 and $4,500. A full double-leaf security gate with heavier steel, a commercial-grade operator, and a telephone entry system commonly runs $12,000 to $18,500 or beyond, depending on length and finish.
What moves the price is simple: the size and weight of the gate, whether it slides or swings, the material you choose, and how much automation and access control you add. Powder coating costs more than paint but lasts far longer in Texas sun. Cedar cladding changes both the look and the maintenance budget. A gate opener that cycles eight times an hour needs a heavier duty rating than one that cycles twice a day.
The way to avoid overpaying is to know exactly what is included. Our written estimates separate steel, fabrication, hardware, opener, access, and labor, so there is nowhere for hidden money to hide. Every estimate is free, and the price we put in writing is the price you pay. Call (817) 580-8494 and we will give you a real number.
Gate Installation Near Southlake - Our Service Area
Ironworks Gate Co. works throughout the communities around Southlake, including Trophy Club, North Richland Hills, Colleyville, Keller, Grapevine, Bedford, Double Oak, Flower Mound, Euless, Hurst, and Watauga. Most of our Southlake installations are scheduled within a week of the estimate, and we keep common hardware and opener parts on the truck so a single visit usually gets the job finished. You can always reach a live person at (817) 580-8494, day or night.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Southlake
Gate installation is the complete process of building and setting a new driveway or pedestrian gate, including the posts, hinges, gate itself, and any automation or access control you choose. In Southlake, that means digging and setting posts in the clay soil correctly, fabricating a gate to your opening, hanging it square, and wiring the operator so it works for years without constant adjustment. Ironworks Gate Co. handles the entire job from the first measurement to the final walkthrough.
Most standard Southlake gate installations take one to two days on site once the gate is fabricated and ready. Fabrication in our shop typically takes two to four weeks depending on material and finish. If we’re replacing an existing gate and the posts are still sound, the job often finishes in a single day.
A typical driveway gate installation in Southlake runs $6,500 to $12,000 installed, with pedestrian gates starting around $1,800 and larger automated security gates reaching $18,500 or more. The final number depends on gate size, material, slide versus swing, and the automation package. Every estimate from Ironworks Gate Co. is free and the price is settled in writing before any work begins.
Yes, LiftMaster is one of the nine automation brands our technicians are trained and equipped to install and service, along with BFT, Linear, Viking, Ghost Controls, FAAC, DoorKing, Elite, and Mighty Mule. If you already have a LiftMaster opener or a preference for one, we will build the gate installation around it. If you don’t have a brand preference, we’ll match the operator to the gate weight and how often it cycles.
If you need Emergency Gate Installation in Southlake, TX because a gate has failed and left your property exposed, call (817) 580-8494 any hour and a live person will answer. We keep common hardware, hinges, and opener components on our trucks, and we will get a technician to your Southlake home as quickly as the schedule allows. A full custom fabrication still takes time in the shop, but we can often secure the opening temporarily and get your gate functioning while a replacement is built.
Every gate installation we complete is covered by the 90-Day Done Right Promise in writing. If anything is not right, we come back and make it right, no paperwork and no arguing. It covers our labor and the hardware we installed, and it is the same promise we have been making across 42 years of doing this work.
Clear the area around the gate line: move vehicles, pots, and anything fragile away from where the posts will go. Mark any irrigation lines or buried utilities you know about, and make sure we can reach the electrical service if we’re adding automation. Beyond that, we handle the site prep, the concrete, and the cleanup, and we’ll leave the work area tidier than we found it. If you have questions before we arrive, call (817) 580-8494 and ask.
Schedule Your Gate Installation Service in Southlake Today
If you’re ready for the Best Gate Installation in Southlake, TX - a gate that closes right, opens smoothly, and stays that way for decades - call Ironworks Gate Co. at (817) 580-8494. Victor Salinas and our team will measure, quote, and install the gate your home deserves, with the price in writing before any work starts and the 90-Day Done Right Promise behind every bolt. Estimates are free, there’s no obligation, and a live person answers around the clock.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake and surrounding communities since 1984.