Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Grapevine
Gate installation in Grapevine almost always starts the same way: with an HOA architectural review. Most of the master-planned communities here, especially Silverlake and Stone Bridge Oaks, won’t let a single post go in the ground until they’ve seen shop drawings and a finish sample. We handle that submittal for you. Our crews have been building and hanging driveway gates in the mid-cities for decades, and we know the Grapevine approval process well enough to keep your project moving instead of stalling at the management office. Call (817) 580-8494 and we’ll start with a free measure and a written price, agreed before any work begins.
Why Ironworks Gate Co. Is Grapevine’s Preferred Gate Installation Company
Two things set Grapevine apart from every neighboring city, and we’ve learned both of them the hard way over the years. First is the clay. The black gumbo soil under most of Grapevine shrinks hard in a 100°F summer and swells back after a week of rain, and any gate post set in a shallow footing will lean within a season. We size footings for the soil, not for the gate. Second is the architectural review process. An ornamental gate that glides through the HOA in Coppell might get rejected in Silverlake over a picket profile. We submit drawings up front so you’re not paying for rework after the fact.
Victor Salinas runs our installation crews and reviews every submittal and footing plan before we dig. Our technicians are background-checked, uniformed, and trained on nine gate-automation brands, so when your gate needs a LiftMaster operator or a FAAC control board, it’s dialed in on the first visit. We also answer the phone with a live person, 24 hours a day. No voicemail tree. Call (817) 580-8494 any morning and you’ll get a person who knows gates, not a call center.
Our Gate Installation Services in Grapevine
Driveway Gate
A new driveway gate in Grapevine typically ranges from $6,500 to $18,000 installed, depending on width, automation, and the finish your HOA requires. Most communities here want ornamental iron in a matte black or bronze powder coat. We handle the shop drawings, the finish sample, the permit, and the install. You get a written price before any metal is ordered.
Our Gate Installation team handles the full scope: hinge posts, welding, operator mounting, safety edges, and the final walk-through. Nothing subcontracted to a handyman.
Pedestrian Gate
Pedestrian gates in Grapevine run from $1,800 to $4,500 installed. That includes a steel frame, your choice of picket style, a commercial-grade latch, and a matching powder coat. They’re common alongside the historic homes near Main Street, where the original wrought iron work from the early 1900s is often too far gone to salvage. We match the period profile where we can and tell you honestly when we can’t.
Sliding Gate
A motorized sliding gate in Grapevine runs $8,000 to $22,000 depending on length and whether you need a cantilever system. Cantilever is the right call on sloped lots along the Grapevine Lake shoreline in the northwest part of the city, where the grade drops enough that a track-style slider would bind. The clay heave makes track systems on a grade a recurring headache; we’ll quote cantilever when the lot calls for it and explain why.
Swing Gate
Ornamental swing gates are the bulk of what we install in Grapevine’s residential neighborhoods. A single swing gate starts around $4,200; a double swing gate across a two-car driveway runs $7,500 to $15,000. That range accounts for the automation you choose, the post footing depth, and any steel reinforcement the soil demands. Swing gates are where undersized footings get exposed fastest here. We don’t undersize them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We’re certified on nine major gate-automation brands, and we keep the most common parts on the truck so a service call in Grapevine doesn’t turn into a two-trip job. LiftMaster operators are common in the newer subdivisions around Stone Bridge Oaks. FAAC and BFT show up on a lot of the commercial and HOA shared entrances along the SH-114 corridor, where airport logistics facilities run heavier-duty gate cycles. Mighty Mule is the usual residential choice and works well for lighter single gates. Whatever is on your driveway now, we can service it and match the automation if you’re adding a gate where none existed.
Common Gate Installation Problems We See in Grapevine Homes
- HOA rejection after posts are set. A homeowner orders a gate, the crew sets the posts, and then the architectural committee objects to the spear-top profile or the finish sheen. We submit first, then build. It’s the only sequence that avoids expensive rework.
- Clay heave on shallow footings. Grapevine’s expansive clay pushes a 24-inch footing out of plumb within two seasons. We set hinge posts in 36-inch reinforced concrete footings on standard lots, and deeper where the soil report warrants it.
- Shared entrance operator without a visitor keypad. In gated communities with one entrance, the operator needs a loop detector, a visitor keypad, and often a telephone-entry panel. Skip the keypad and the HOA board hears about it from every resident who misses a delivery.
- Slope ignored on a sliding gate. Lots near Grapevine Lake drop fast. A track slider installed on a grade will bind and drag within months. We specify cantilever systems on sloped driveways and explain the difference up front.
HOA Approval: How It Works in Grapevine
In Grapevine’s master-planned communities, the architectural committee does not want to see a finished gate on delivery day. They want shop drawings, material specs, finish samples, and sometimes a site plan showing the gate’s setback from the street. That’s the submittal package. We prepare it. The management company reviews it, and the committee approves or requests changes, usually within two to four weeks. This is the step that catches out homeowners who came from a city without active covenant enforcement. Grapevine is not that city. Silverlake, Stone Bridge Oaks, and the lakefront communities along Grapevine Lake all enforce their standards, and some of those standards are specific: matte black only, spear-top pickets, no decorative scrollwork above the top rail, minimum stile sizes. We’ve installed in all of them and we keep a library of what each community has approved in the past. It saves you time and spares you a rejected submittal.
Built for Grapevine Soil, Not Just Grapevine Style
There’s a technical side to gate installation here that flat-lot installers miss. Grapevine’s expansive black clay loses moisture through July and August, pulling away from concrete footings and leaving posts loose. Then the fall rains come and the clay swells back, shoving against the footing from the side. That cycle, repeated every year, is why we see hinge posts leaning a half-inch out of plumb within eighteen months of a cheap install. We set posts below the active shrink-swell zone, in footings sized for the gate’s weight and the soil report, and we use steel reinforcement on every hinge post. It’s more concrete and more steel than a budget quote includes, and it’s the only way we will install a gate in this town.
Our crew recently installed a double swing gate in Silverlake, off Hall-Johnson Road. The HOA required a matte black powder coat over forged iron with spear-top pickets. The driveway sloped three inches over twelve feet, so we set the hinge posts in 36-inch concrete footings with steel reinforcement to keep winter clay heave from throwing the gates out of plumb. The submittal was approved in eleven days. The gates still close square two seasons on.
Pricing for Gate Installation in Grapevine, TX
A pedestrian gate in Grapevine runs $1,800 to $4,500 installed. A single swing gate runs $4,200 to $8,500. Double swing gates across a driveway run $7,500 to $15,000. Sliding gates start around $8,000 and climb to $22,000 for a long cantilever across a sloped lot. These ranges cover the steel, the welding, the operator if automated, and the finish your HOA approves. What moves a project toward the top of the range is usually the automation brand, the gate length, and the footing depth. Grapevine soil pushes footing costs up compared to a sand-soil city like Coppell, but it’s the difference between a gate that hangs square for twenty years and one that drags after the second spring rain. Every job is priced and agreed in writing before we order steel or dig a hole.
We Also Serve Cities Near Grapevine
Ironworks Gate Co. serves the whole mid-cities corridor. If you’re in Southlake, Colleyville, Coppell, or Euless, the same crews and the same written guarantee apply. We schedule Grapevine work throughout the week and can usually turn around an approved submittal within a day or two of receipt. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and our Grapevine crews live in the area.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Grapevine
Yes, if you live in a covenant-governed community. In neighborhoods like Silverlake and Stone Bridge Oaks, the management company requires architectural review before installation. We prepare the submittal package at no cost, including shop drawings and finish samples. Waiting for approval adds two to four weeks to the timeline, but skipping it risks a stop-work order and a costly rebuild. We recommend submitting before you order any steel. Call (817) 580-8494 and we’ll tell you what your specific HOA’s checklist looks like.
Grapevine’s expansive black clay shrinks and swells with the seasons, which pushes shallow post footings out of plumb. We set hinge posts in concrete footings at least 36 inches deep with steel reinforcement, below the active shrink-swell zone. That’s deeper and heavier than a minimum-code footing. It’s also the reason a proper Grapevine gate install costs a few hundred dollars more in concrete and steel than the same gate in a city with stable soil. The alternative is a gate that binds within two years.
Yes, but a track-style slider will bind on a grade. For sloped driveways, especially along the Grapevine Lake shoreline northwest of downtown, we specify a cantilever sliding gate. The gate rides above the ground on rollers and a counterbalance, so it doesn’t touch the drive and doesn’t care about the grade. Cantilever systems cost more than track systems because they need a longer steel frame and heavier posts, but on a sloped Grapevine lot, anything else is wasted money. We’ll measure your grade and tell you straight which system the lot wants.
A shared community entrance needs a loop detector to open automatically for exiting vehicles, a visitor keypad for guests and deliveries, and typically a telephone-entry panel tied to each home. Some HOA boards also want a timer that leaves the gate open during school commute hours. We program all of that in the operator’s control board and hand the board a simple instruction sheet. We have installed shared entrances along the SH-114 corridor and at residential communities throughout Grapevine, and we know the features boards actually ask for at the next meeting. Call (817) 580-8494 for a walkthrough of what your entrance needs and what it costs.
Yes. We send submittals directly to the management company, schedule the install around any posted community dates, and handle the final inspection sign-off where one is required. We have worked with management companies in Silverlake, Stone Bridge Oaks, and other Grapevine HOA-governed communities, and we speak their language: drawings, specs, finish samples, and a clean site at the end of the day. You won’t be the one carrying papers between us and the board.
Get Your Grapevine Gate Project Started
We build gates that close square, clear the drive, and look right against a North Texas ranch house or a modern lakefront build, and we price everything up front. Every job carries the 90-Day Done Right Promise in writing, no arguing. Call (817) 580-8494 for a free measure and a written estimate, or ask for Victor Salinas and he’ll talk you through the Grapevine approval process before you spend a dollar.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Grapevine since 1984.