Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Keller
If your Keller driveway gate is sagging, dragging, or refusing to open, the problem usually lives in two places: the hinge post and the operator. We fix both. Ironworks Gate Co. handles hinge replacement, post reset and replacement, rail repair, and Gate Installation - Keller for the ornamental iron gates that line the streets of 76244 and 76248. Most Keller jobs are done in one visit, with the price settled before we turn a single bolt. Call (817) 580-8494 and a live person answers, day or night.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Parts & Welding Company
Keller is not a chain-link fence town. The neighborhoods here, from Hidden Lakes to Marshall Ridge to the estates off Rapp Road, are full of custom wrought-iron driveway gates that have been swinging on the same hinges since the Clinton administration. Our technicians know what those 20-year-old gates look like underneath the powder coat, because we have opened enough of them to recognize the failure patterns by sight. A sagging gate leaf off Mt. Gilead Road almost always traces back to a hinge post that has leaned with the clay, not a hinge that wore out on its own.
Victor Salinas leads our team with 42 years of gate work behind him, and the standard never bends: background-checked techs in uniform, a written 90-Day Done Right Promise on every job, and a real person on the phone 24 hours a day. Keller homeowners tend to stay in their homes for decades, and they expect the work to hold up for decades too. That is exactly how we build it.
We carry a full stock of hinges, posts, rollers, latches, and weld material sized for the heavy ornamental gates common in Keller. That means less waiting on parts and more jobs finished the same day we arrive.
Our Gate Parts & Welding Services in Keller
Hinge Replacement
Most Keller gates hang on barrel hinges or heavy strap hinges welded to the post and gate frame. After 15 to 20 years of North Texas heat, rain, and clay movement, those welds crack and the hinge pins wear oval. We cut out the old hinge, weld in a matching replacement, and align the gate so it swings without dragging. If your HOA in a community like Hidden Lakes requires architectural review before any visible metalwork changes, we document the hinge style and finish so the board gets exactly what they ask for on the first submission.
Post Replacement
Here is the Keller-specific truth: most gate posts do not fail. They get pushed out of plumb by Tarrant County black clay, which shrinks in summer drought and swells after a hard rain. The post itself may still be solid, but the footing has shifted. We reset the post, pour a deeper footing when the soil demands it, and weld the gate brackets back square. In Keller, a post replacement is rarely just pulling out a bent pipe. It is correcting two decades of slow ground movement.
Rail Repair
Ornamental iron gates in Keller neighborhoods like Stone Creek and Villages of Woodland Springs take a beating on the lower rails. Lawn sprinklers soak the bottom rail, grass clippings hold moisture against the steel, and rust eventually eats through. We cut out the rotted section, weld in new steel matched to the existing profile, and grind the repair flush before priming and painting to match. The repair disappears. The HOA never flags it.
Custom Welding
When a gate is too far gone for a patch, or when a Keller homeowner wants a modification, like adding a pedestrian pass-through, extending a gate leaf, or reinforcing a sagging top rail, our welding rig handles it on site. We can match existing scrollwork, pickets, and rail profiles closely enough that a neighbor would not spot the difference. For homes in the more deed-restricted sections of 76244, we are used to submitting weld-spec documentation with the architectural review form.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
Keller’s gate operators span a few decades of technology. The late-1990s and 2000s buildout favored Apollo and Linear actuators, many of which are now failing. Newer installs run LiftMaster, FAAC, BFT, or Mighty Mule. Our techs are trained and equipped on nine major automation brands, so the Keller Gate Motor & Opener that greets us in your driveway is one we already know how to fix or replace. When a Keller gate has both a mechanical weld failure and an operator issue, we handle both in the same visit rather than sending you to two different companies.
Common Gate Parts & Welding Problems We See in Keller Homes
- Clay heave throwing posts out of plumb. Keller sits on expansive black clay that shrinks in summer and swells after rain. A gate post that was perfectly vertical in 2005 may now lean 3/4 inch toward the street, binding the operator and stripping the rack.
- Rusted lower rails and hinge welds. Sprinkler overspray and wet grass accelerate corrosion on the bottom rail. By the time the gate sags visibly, the rail steel is often rusted through and needs sectioned replacement.
- HOA architectural review stalling urgent repairs. Many Keller HOAs require board approval for any change to a visible gate surface. A homeowner with a sagging gate cannot always proceed immediately, and we are used to providing the documentation boards ask for.
- Storm-surge operator failures. Keller’s frequent severe thunderstorms send power surges into gate control boards. A perfectly good operator can die in one lightning storm, and the repair often coincides with a HOA requirement for a licensed contractor invoice.
Pricing for Gate Parts & Welding in Keller, TX
Hinge replacement on a typical Keller ornamental iron gate runs $180 to $420 per hinge, depending on whether we are patching a weld or replacing the full hinge assembly and pin. Post replacement with a new footing generally lands between $600 and $1,400 per post, with the higher end reserved for tall estate gates on hillside lots where the footing must go deeper. Rail repair by section runs $150 to $450, and custom welding work is quoted by the linear foot and complexity, usually $250 to $900 for a typical sag repair with scrollwork matching. Every price is quoted and agreed before any work starts, and the 90-Day Done Right Promise covers the labor and parts we install. Call (817) 580-8494 for a free estimate, and ask about the $50 off any repair over $250.
Key Takeaways
- Most Keller gate failures trace back to black clay movement, not the gate hardware itself.
- HOA approval is a real step in Keller, and we handle the documentation.
- Prices are set before work starts, with the 90-Day Done Right Promise in writing.
- One visit typically covers both the weld work and the operator.
We Also Serve Cities Near Keller
Beyond Keller, our Gate Parts & Welding team covers North Richland Hills, Southlake, Colleyville, and Hurst. Most of those jobs share the same Tarrant County clay and the same aged ornamental iron stock, so what we learn in Keller serves the whole area.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Keller
In many Keller communities, yes, when the hinge is visible from the street and changes the gate’s appearance. The board typically wants to see the replacement hinge style, finish, and dimensions to confirm they match the original. We provide that documentation as part of the quote, and we have worked with the architectural review committees in Hidden Lakes, Marshall Ridge, and several other 76244 and 76248 communities. If your HOA bylaws exempt ordinary maintenance, a straight hinge swap may not need review, but it is cheaper to confirm that before the work than to fight it after. Call (817) 580-8494 and we will help you check.
The black clay under your gate post shrinks when it dries, which makes the post lean away from the gate and lowers the latch end. When spring rains return, the clay swells and the post temporarily straightens. That is a footing problem, not a hinge problem. Welding the hinge or bending the gate will not fix it permanently. The post footing needs to be reset and possibly deepened below the shrink-swell zone, which is work our crew handles regularly across Keller. Call (817) 580-8494 for an assessment.
Yes. We weld new steel into the profile of the existing rail and match the scrollwork pattern closely enough that most homeowners cannot find the repair afterward. For Keller HOAs that require board review, we photograph the original pattern and document the finished repair so the committee sees an exact match to the original height, profile, and finish. This is standard work for our Gate Parts & Welding team.
It depends on the Keller community. Some HOAs treat the operator as invisible infrastructure and allow replacement without review. Others want to see the equipment spec sheet because the new Gate Access Control in Keller may alter the gate’s opening speed or safety features. We supply the UL 325 compliance documentation and equipment specifications either way, and if your board wants an architectural review form completed, we will provide the technical details they need to sign off. Call (817) 580-8494 and we will explain how it works in your neighborhood.
The original Apollo or Linear actuator failing after two decades, compounded by a hinge post that has drifted out of plumb from clay movement. The gate has been slowly binding for years, which overworked the motor until it quit. A full repair means swapping the operator and realigning the post, which is exactly the two-part job we handled on a 22-year-old swing gate in Hidden Lakes, where we reset the post, welded in a new hinge assembly, and installed a LiftMaster operator. The gate now swings true. Call (817) 580-8494 for the same kind of repair on your gate.
Call Ironworks Gate Co. for Gate Parts & Welding in Keller
When your Keller gate needs a weld, a hinge, a post reset, or a full operator replacement, call (817) 580-8494. A live person answers, 24 hours a day, 7 days a week. We will give you an honest price before any work starts, handle the HOA paperwork if your community requires it, and stand behind the job with the 90-Day Done Right Promise in writing. Victor Salinas and the Ironworks Gate Co. team are ready to make your gate close like the day it was hung.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the surrounding Tarrant County communities.