Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Keller
When a Keller homeowner calls us about gate access control, the question is almost never “can you put in a keypad.” It’s “can you make the one I have work again, or do I need to start over.” In most Keller neighborhoods, the answer is somewhere in the middle: retrofit what’s still sound, replace what isn’t, and document everything the HOA needs. We’ve been doing exactly that across Keller’s 76244 and 76248 ZIP codes long enough to know which operators were good in 2003 and which were not. If your gate won’t respond to the keypad, the remote, or the phone, call (817) 580-8494 and a live person will answer. Always.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Access Control Company
Keller is a particular market for gate work. The homes are large, the lots are generous, and a lot of the iron gates hanging today were installed when the streets were first paved. That means we spend our days on ornamental swing gates and slide gates, nearly all of them automated, and many still carrying their original Linear or Apollo actuators. We know what those operators do after fifteen or twenty years of North Texas weather. We also know what the HOA expects when you touch them.
Our team is led by Victor Salinas, and every technician who arrives at a Keller home is background-checked and uniformed. We service nine gate automation brands that are common in this area: LiftMaster, FAAC, Linear, Elite, Mighty Mule, and others. That range matters here, because Keller’s housing stock spans several build eras, and no single brand dominates. Dispatch for Keller is coordinated from our Dallas-Fort Worth office, and crews reach homes in 76244 and 76248 on a regular schedule throughout the week. When you call, you’ll speak to a person, not a phone tree, 24 hours a day and 7 days a week.
What Sets Us Apart in Keller
- 90-Day Done Right Promise, in writing. If the repair or installation is not right, we come back and make it right. No paperwork, no arguing, no exceptions.
- HOA documentation is routine for us here. We provide the technical drawings, equipment specs, and install descriptions Keller architectural review committees ask for before we touch the gate.
- Upfront pricing, settled before work begins. You’ll know the number before a bolt is turned. No surprises on the bill.
- A live person answers every call, day or night. Not a voicemail, not an answering service, not a callback queue.
Our Gate Access Control Services in Keller
Access control isn’t one product. It’s the system that decides who gets in and when. In Keller, that system usually includes a keypad or intercom at the drive, a receiver in the operator, and remotes or phone apps inside the house. Here’s how we handle each piece.
Keypad Entry
Most Keller driveway gates built in the 1990s and 2000s have a wired keypad mounted on a gooseneck post near the street. Over time, the membrane buttons wear out, the wiring corrodes at the connection, or the keypad simply stops talking to the operator. We install new wired and wireless keypads, program codes, and replace sun-faded or water-damaged housings. A standard keypad replacement in Keller typically runs $280-$520 depending on the brand and whether the wiring needs to be re-pulled.
Remote Control
Remotes fail in predictable ways: batteries, first, then the internal micro-switches, then the receiver board on the operator itself. If your gate opens with the keypad but not the remote, the problem is usually the receiver or the remote, not the motor. We pair new remotes to all the major brands we service, and we can clone most existing working remotes on-site. Adding or replacing a remote in Keller generally costs $75-$150 per remote, including programming.
Phone Entry
The phone entry systems on Keller gates are often older cellular or landline units that the homeowner has stopped using because the interface is clunky or the line was disconnected. We replace those with modern GSM or internet-based phone entry modules that call your cell phone when someone presses the button at the gate. From your phone, you can open the gate for a delivery driver or a grandchild without walking to the keypad. Phone entry system installation in Keller typically runs $950-$1,600 depending on the module and whether cellular service or internet is used.
Card Reader
Card readers are less common on single-family Keller driveways but show up on some of the larger estate properties and shared private lanes. We install and service proximity readers, key fob systems, and card readers that tie into the existing operator. If a community gate serves several homes on a private road off Keller-Smithfield or along Randol Mill, we can set up multi-user access with individual cards for each household. Card reader systems start around $700 and run higher depending on the number of users and the gate’s existing hardware.
Video Intercom
This is the upgrade Keller homeowners ask about most, especially on gates set far back from the house. A video intercom lets you see who’s at the gate on your phone or an in-home monitor, talk to them, and open the gate without leaving the kitchen. We install flush-mount and surface-mount video stations, connect them to your Wi-Fi or a hardwired network, and integrate them with the existing gate operator. Video intercom installation in Keller typically runs $1,200-$2,400 depending on the camera resolution, whether you want cloud recording, and whether the home needs additional network hardware.
Smart Access
Smart access means controlling the gate from your phone, from anywhere. This ranges from a simple Wi-Fi bridge on a newer LiftMaster operator to a full retrofit on a 20-year-old machine that has no smart capability at all. We’ll tell you honestly when a retrofit makes sense and when the old operator is too far gone. On a typical Keller gate, adding smart access to an existing compatible operator runs $400-$800. Retrofitting an older system with a new receiver and app-based controller runs higher, usually $900-$1,400.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We carry parts and programming for the brands Keller homeowners actually have on their driveways. LiftMaster and FAAC operators are common on newer homes in 76244. Elite and Mighty Mule show up on many of the mid-2000s estate gates in 76248. Linear and Apollo are the legacy operators we see most on the original-install gates from the late 1990s and early 2000s, particularly in Hidden Lakes and other established Keller neighborhoods. Because we stock common boards, remotes, and safety edges for these brands locally, most Keller jobs are completed in a single visit rather than waiting on a parts shipment.
Common Gate Access Control Problems We See in Keller Homes
Keller’s soil and weather create a particular set of failures. These are the four we see most often.
- Post movement from black clay soil. Keller sits on expansive clay that shrinks in summer and swells after rain. That movement torques gate posts out of plumb, and a gate leaf that’s even an inch out of alignment can stop tripping the loop detector or binding the operator. The motor may be fine. The posts are not. Fixing this properly means resetting the footer, not just adjusting the limit switches.
- Surge-damaged control boards. North Texas thunderstorms roll through Keller every spring and fall, and power surges take out gate operator circuit boards at a rate that surprises new homeowners. The keypad goes dark, the remote does nothing, and the board is fried. We replace surge-damaged boards and recommend surge protection on every new install in Keller.
- Obsolete operators that were never serviced. Many Keller gates still run their original actuator from 2000 or 2003. It was never lubricated, never adjusted, and now it’s seized. At that age, replacing the operator is usually cheaper than trying to rebuild it, especially once you factor in the cost of labor to chase parts that are no longer made.
- HOA-driven delays that turn into emergencies. Keller homeowners sometimes discover that their HOA requires architectural review before a gate operator can be replaced. If the old unit is already dead and the gate is stuck, that wait becomes a security problem. We provide HOA documentation quickly so the review moves forward without days of back-and-forth.
Pricing for Gate Access Control in Keller, TX
Here’s what Keller homeowners can expect to pay, based on the jobs we’ve done across 76244 and 76248. These are real ranges, not teaser numbers.
- Keypad replacement: $280-$520
- Remote programming or replacement: $75-$150 per remote
- Phone entry system: $950-$1,600
- Video intercom with phone app: $1,200-$2,400
- Card reader system: $700-$1,800 depending on user count
- Smart access retrofit: $400-$1,400 depending on operator age
- Full operator replacement (labor and equipment): $1,800-$3,500 depending on gate type and brand
Every price is quoted and agreed before we start. If a hidden issue appears after the gate comes apart, we stop, show you what we found, and get your approval before adding a dollar. We also offer a free second opinion on any written estimate, a $50 discount on repairs over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (817) 580-8494 for an exact quote.
To see the full scope of what we do, visit our Gate Access Control service page for details on how we diagnose and repair every part of the system.
We Also Serve Cities Near Keller
Our Keller customers often ask us to help family and friends in the neighboring communities. We regularly serve Gate Access Control in Keller as well as North Richland Hills, Southlake, Colleyville, and Hurst. The same technicians, the same 90-Day Done Right Promise, and the same live-answer phone line cover all of these cities.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Keller
We provide a written description of the work, equipment specifications, a site plan showing the gate and operator location, and photographs of the existing hardware if the HOA requests them. This package will meet the architectural review requirements of most Keller HOAs. If your committee needs something additional, we’ll produce it. The key is to get approval before the old operator is removed, because a gate stuck halfway open is both a security problem and a code violation. Call (817) 580-8494 and we’ll help you start the paperwork.
The black clay soil under your gate posts shrinks when it dries out, which drops the post and the gate leaf slightly, pulling the hinges out of alignment and causing the leaf to bind against the post or the ground. After rain, the clay swells and pushes everything back up, which is why the gate works again temporarily. The cure is resetting the post footing and re-hanging the leaf, not adjusting the operator’s force settings to muscle through the bind. That just burns out the motor faster.
Yes, in most cases. The access control side is largely independent of the actuator brand. A video intercom and keypad interface can be wired to the operator’s open-command terminals on most Apollo and Linear units from the late 1990s and early 2000s. The question is whether the actuator itself is worth keeping. If the motor is original and the posts have been moving for two decades, you may be better off replacing the operator at the same time and starting with equipment that will carry the new access control system for another 15 years.
If your gate fails to open for a vehicle but opens fine with the remote or keypad, the loop detector or the loop wire in the driveway is the likely problem. The black clay movement can shear the loop wire underground over time, breaking the circuit. Electronics can also fail from surges. We test the loop with a meter, and if the wire is broken, we cut a new loop into the driveway rather than digging up the old one. The diagnostic visit gives you a straight answer: wire, board, or both.
Yes. If your gate predates the modern UL 325 safety standards, or if the existing photocells are dead or missing, we will install new photo eyes and safety edges as part of any operator replacement. This is not optional add-on work. It’s about making sure a closing gate stops if a child, a pet, or a car is in the path. We include safety equipment in every operator replacement quote in Keller, and we’ll explain exactly what’s going on the gate and why.
Call Ironworks Gate Co. for Gate Access Control in Keller
If your Keller gate is giving you trouble, call (817) 580-8494. You’ll speak to a person who knows Keller, knows these gates, and will give you a straight answer about what’s wrong and what it costs to fix. Estimates are free. The work is guaranteed in writing. And if it’s not right, we come back and make it right. That’s the way Victor Salinas has run this company, and it’s the way we’ll handle your gate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the surrounding communities with gate repair, installation, and access control.