Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Southlake
A new driveway or pedestrian gate in Southlake runs anywhere from $4,800 for a basic single swing gate to $28,000+ for a custom double security gate with full automation and access control. Most installations take two to four days from tear-out to final keypad programming, and our crews work Southlake weekly. The reason local expertise matters here has everything to do with what’s under your gate posts: Blackland Prairie clay that heaves seasonally and does not forgive a footing poured too shallow. Call us at (817) 580-8494 and we’ll walk you through what your specific entry needs before you spend a dollar.
Why Ironworks Gate Co. Is Southlake’s Preferred Gate Installation Company
We’ve pulled more discontinued operator boards out of Timarron, Monticello, and Clariden Ranch gate pillars than we can count. That’s not a brag. It’s just what happens when you work Southlake’s specific housing stock year after year and understand what the original builders put in during the 1990s and 2000s. When a homeowner near Southlake Town Square calls about a dead swing gate, we already know what board is likely in the box before the truck rolls.
Our Gate Installation team works directly with homeowners off Dove Road, South Carroll Avenue, and throughout the 76092 corridor. We quote the job in person, settle the price before any work starts, and our technicians show up in uniform with the right parts for the gate you actually have, not whatever fits a generic install. Southlake customers regularly tell us the same thing: they called us after another company quoted a repair that didn’t hold, and they wish they’d called us first. You won’t get a voicemail here. A live person answers at (817) 580-8494, every time.
Every installation we complete in Southlake carries our 90-Day Done Right Promise in writing. If the gate binds, the operator struggles, or the keypad acts up within three months, we come back and fix it. No paperwork, no back-and-forth. That’s the standard on every job, from a simple pedestrian gate in Estes Park to a full automated estate gate in Timarron.
Our Gate Installation Services in Southlake
Driveway Gate Installation
A new driveway gate in Southlake usually means a custom ornamental iron swing gate hung between existing brick or stone pillars. We fabricate the gate to match your home’s existing ironwork, set post footings below the active clay zone so the gate doesn’t drift out of plumb within eighteen months, and install the operator you’ll actually be able to get parts for in 2035. If your property is off Shady Oaks Drive or along the Whites Chapel corridor, we’ll measure on-site and give you a written number that won’t change after we start digging.
Pedestrian Gate Installation
Pedestrian gates in Southlake get used more than any other gate on the property: kids walking to Carroll ISD schools, landscapers, package deliveries off Southlake Boulevard. We install them with self-closing hinges rated for daily use and match the picket spacing and scrollwork to your driveway gate. Most pedestrian gates run $2,200 to $6,500 installed, depending on width and whether you want a keypad or intercom tied in.
Sliding Gate Installation
Sliding gates make sense on Southlake properties where a swing gate’s arc would block the driveway slope or fight the grade. We install cantilever and V-track sliding gates with the correct wheel assemblies for the weight of the gate, and we run the operator wiring in conduit that survives the clay movement. A sliding gate install typically lands between $7,500 and $19,000 here, driven by gate length and whether you’re adding vehicle detection loops.
Swing Gate Installation
This is the work we do most in Southlake, because this city’s custom-estate housing stock is overwhelmingly swing-gate construction. We set heavy-duty hinge posts, hang the leaf so it swings square with no sag, and size the operator to the gate’s actual weight, not the builder’s original spec. When a Timarron homeowner asks us to replace a failing gate, we’re often replacing the operator too, because the original builder-grade unit was undersized for the ironwork it was asked to move.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
We install and service LiftMaster, FAAC, Elite, and Mighty Mule operators on Southlake gates every month, and we carry common replacement boards and arm assemblies on our trucks so we’re not making a homeowner wait a week for a part. If your current gate runs on a discontinued board from the 1990s or early 2000s, we’ll tell you straight what a current-model LiftMaster or FAAC swap involves and what it costs before we touch anything. For Southlake’s heavier custom iron gates, we typically recommend LiftMaster’s LA500 or a FAAC swing operator sized to the actual gate weight.
Common Gate Installation Problems We See in Southlake Homes
- Builder-grade operators dying under custom iron weight. Many Southlake homes built between 1991 and 2010 got a lightweight operator spec’d for a basic aluminum gate, then a custom wrought-iron gate went on the same posts. The motor gives out in a few years because it’s been overloaded since day one. We replace it with an operator rated for the actual gate.
- Missing conduit runs for automation. Homes with manual gates added during construction often have no conduit from the house to the gate. Southern clay’s expansive shuffle cracks PVC that’s too shallow or not bedded correctly. We trench properly, sleeve it, and run what’s needed for keypads, photocells, and intercoms without disturbing your brick pillars.
- Double swing gates drifting out of alignment each fall. Post footings poured above the active clay zone heave with the seasons. The master leaf starts binding, the operator strains, and by October the gate stops halfway. We address this by setting footings below the shrink-swell depth and re-hanging the leaves square.
- Obsolete control boards with no local replacement. The original automated systems in Timarron and other Southlake master-planned communities often ran on proprietary boards that are no longer manufactured. A homeowner calls expecting a board swap and learns the entire operator needs replacing. We stock current-model replacements and can usually complete that install in one visit.
Pricing for Gate Installation in Southlake, TX
Here’s what Southlake homeowners should expect to budget. A pedestrian gate runs $2,200 to $6,500 installed. A single automated swing gate across a standard driveway runs $4,800 to $12,000, depending on gate width, ironwork complexity, and whether we’re tying into existing pillars or pouring new footings. A double swing or sliding estate gate with full automation, keypad entry, and safety photocells runs $9,500 to $28,000+. Custom ornamental ironwork, intercom integration, and camera tie-ins add to the top end. Every quote we give in Southlake is free, written, and agreed before we order materials or turn a wrench. Call (817) 580-8494 for a measure and a firm number.
We Also Serve Cities Near Southlake
Ironworks Gate Co. serves Southlake and the surrounding communities, including Colleyville, Grapevine, Bedford, and Keller. If you’re just outside the city line, call us anyway. Our scheduling runs through the Dallas-Fort Worth office, but crews work locally throughout the northeast Tarrant County area every week.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Southlake
The short answer is that most Timarron gates from the 1990s and 2000s were built with custom ornamental iron hung on operators that were never rated for that gate’s weight. Add Southlake’s Blackland Prairie clay heaving the posts out of plumb each season, and the motor burns out fighting a gate that’s slowly binding. Colleyville homes in the same era often got lighter, standard-spec gates that matched their original operators. Call (817) 580-8494 and we’ll size a replacement operator for your actual gate, not the builder’s original spec sheet.
Yes, and this is a job we do regularly in Southlake’s master-planned communities. The gate itself usually stays. We surface-mount or bolt the operator arm to the gate and a reinforced plate on the pillar, run new conduit for power and control wiring (typically through the lawn or under the driveway, not through the pillar), and leave your brick and stone work untouched. Expect $3,200 to $7,500 for a standard single-gate automation job here, depending on access and whether you want a keypad or intercom added. Estimates are free.
In Southlake, it’s usually the truth. The proprietary control boards installed during the original 1990s and 2000s buildout in Timarron and similar communities have been discontinued for years, and no direct replacement exists. When the board dies, the only correct repair is a full operator replacement with a current-model unit that we can actually get parts for. We’ll show you the dead board and explain the swap before quoting anything. Call (817) 580-8494 and Victor or the team will give you a straight answer.
That’s the clay. Southlake’s expansive soil shrinks through the hot summer, then re-swells with fall rains, and the post footings move with it. By October, the master leaf has drifted enough to bind against the latch post or the slave leaf, and the operator shuts down mid-cycle. The lasting fix is resetting the footings below the active shrink-swell zone and re-hanging the leaves square. A temporary re-level might get you through the season. We’ll tell you which one your gate actually needs when we look at it.
UL 325 is the federal safety standard requiring all automated gate operators to include entrapment protection: photocells or contact edges that stop and reverse the gate if a person or vehicle is in the path. Every automated gate we install in Southlake includes current-UL-325-compliant protection, and we check for it on every service call. If your gate operator predates the standard or has disabled safety edges, that’s a hazard we’ll flag and correct. Call (817) 580-8494 for a free inspection of your existing system.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake and the surrounding northeast Tarrant County communities with dedicated gate installation and repair since 1984.