Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Double Oak
Gate installation in Double Oak means working with long driveways, wide entrances, and heavy gates that have to hold up to Texas weather and daily horse-trailer traffic. Most Double Oak properties sit on 1 to 5 acre lots with driveway runs of 150 to 300 feet, so the power problem and the span problem come first: you either trench a power line that far, or you go solar and size the operator for a 14 to 18 foot gate that weighs more than the average subdivision gate. We design for that from day one. Call (817) 580-8494 for a free on-site estimate, and we’ll walk your property with you before quoting a single number.
We coordinate scheduling from our Dallas-Fort Worth office and have crews serving Double Oak throughout the week, with a live person answering the phone 24 hours a day. When a gate fails on a 250-foot driveway, you’re not walking to the house. You’re stuck. We get that.
Why Ironworks Gate Co. Is Double Oak’s Preferred Gate Installation Company
Ironworks Gate Co. has been in the gate trade for over 42 years, and Double Oak is exactly the kind of town that tests whether a gate company actually knows its craft. The mix here is uncommon: ornate automated entry gates on long private drives, plus functional ranch-style pipe and tube-steel gates for horse paddocks. A technician who only works on subdivision swing gates gets lost fast. Our crews are trained on nine operator brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and we weld in-house, so a custom latching detail or a wider post spread doesn’t send us running for a fabricator.
Every job is protected by our 90-Day Done Right Promise. It’s written, not verbal: if something isn’t right after we leave, we come back and make it right. No paperwork, no arguing. Double Oak homeowners tend to remember the last contractor who didn’t show up or didn’t stand behind the work. We write the guarantee before we start, not after something fails. Owner Victor Salinas set the standard years ago and it hasn’t moved: the 400th job gets the same care as the first.
We also answer the phone. Not a voicemail tree, not an answering service. A live person, 24 hours a day, 7 days a week. When a Double Oak gate goes down at 7:00 a.m. on a Sunday and the horses are waiting, that matters.
Our Gate Installation Services in Double Oak
Driveway Gate Installation
Most Double Oak driveway gates are 14 to 18 feet wide at the road, built from ornamental steel or heavy tube steel, and they sit at the end of a driveway that runs 150 to 300 feet before the house is even visible. That length drives every design decision: operator torque, wiring method, solar capacity, and whether you need a vehicle loop detector or a keypad for exit. We spec the operator for the actual weight and duty cycle of the gate, not for what’s cheapest on a shelf. A poorly sized operator on a Double Oak property fails within two or three summers.
Pedestrian Gate Installation
A separate pedestrian gate alongside the main driveway gate is common here, especially on properties with ranch-style fencing. It saves hundreds of open-and-close cycles per month on the big operator, which extends its life meaningfully on acreage properties where the gate sees 30 or 40 cycles a day. We build pedestrian gates to match the height and finish of the existing driveway gate, with a self-closing hinge set and a mechanical or maglock latch rated for daily use.
Sliding Gate Installation
Sliding gates make sense on Double Oak lots where a long driveway runs parallel to the road and a swing gate would eat too much driveway space. They need a straight, level travel path and a proper steel V-track or cantilever roller setup, because a sliding gate that binds is one that burns out motors. The expansive clay soil here doesn’t help: we pour concrete footings and track beds deeper than code minimums, because we have seen too many gates start binding within two years when the ground moves.
Swing Gate Installation
Swing gates are the standard on Double Oak’s equestrian properties, and they’re the most vulnerable to the one thing this town has in abundance: expansive clay soil. Post footings shift with seasonal moisture swings, the gate racks out of alignment, and the operator strains until it fails. We set posts in concrete footings sized for the soil, not for a generic spec sheet, and we use heavy-duty hinges with greasable bearings so the gate swings true for years. For double swing gates on wide driveways – the kind you need for a horse trailer – we pair both leaves with matched operators and a sequenced controller so they open and close without colliding.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Double Oak
We stock parts and operators for the brands we see most often in Double Oak, because waiting on a shipped part means a gate down for a week. LiftMaster, FAAC, and Elite cover most of what’s installed out here – LiftMaster for the newer heavy-duty swing and slide operators, FAAC for European-style rams and underground systems, and Elite for those 1990s units that are still limping along on acreage driveways. We carry boards, arms, remotes, and solar components for these in the truck, which is why most Double Oak repairs and installations happen in one visit.
Common Gate Installation Problems We See in Double Oak Homes
- Swing gates racked out of alignment from clay soil movement. Double Oak sits on expansive clay that swells in wet seasons and contracts in drought. Gate posts shift, the leaf drops or binds, and the operator works twice as hard until it cooks itself.
- Solar gate openers dying on shaded, long driveways. Many Double Oak driveways are lined with mature oaks and cedars. A solar gate opener sized for open sun gets starved in the shade, and by August the battery is dead and the gate won’t move. We size panels and battery banks for the actual sun exposure, not the sales brochure.
- Old 1990s Elite and Apollo operators failing abruptly. These units are all over Double Oak, mostly original equipment on homes built in the late 1980s through the 2000s. They fail suddenly, often leaving a 300-foot driveway gate stuck open or closed, and they predate modern photocell safety requirements. We replace them with compliant operators and set the safety edges and photocells to current code.
- Double gates where one leaf opens and one doesn’t. On wide equestrian entrances, a mismatched pair of operators or a bad limit switch creates a gate that opens halfway. For Double Oak residents hauling horse trailers, that’s a real problem. We synchronize both leaves at installation and set the open and close limits properly, so the full 16 or 18 foot opening is actually available.
Pricing for Gate Installation in Double Oak, TX
A complete single swing gate installation in Double Oak, with a heavy-duty operator and basic keypad entry, typically runs $4,200 to $6,800 depending on gate width, material, and whether power is already at the location. A double swing gate for a wide equestrian entrance runs $7,500 to $11,000. Sliding gates run $5,800 to $9,500 because of the track and footing work. A solar operator setup adds roughly $800 to $1,500 depending on panel and battery sizing. A standalone pedestrian gate runs $1,200 to $2,800 installed.
The price we quote is the price you pay. We walk the site, measure, check for power access and soil conditions, and write the number down before any work starts. No change orders after we’ve dug the footings. Call (817) 580-8494 for a free on-site estimate in Double Oak, and you’ll have a written price the same day.
We Also Serve Cities Near Double Oak
Our Gate Installation team works throughout the Denton County and northeast Tarrant County corridor, including Southlake, Trophy Club, North Richland Hills, and Bedford. If you’re outside Double Oak and need a gate installed or repaired, the same crews and the same 90-Day Done Right Promise apply.
Serving Double Oak, TX - Our Local Coverage Area
We’re based in the Double Oak area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Double Oak
Double Oak sits on expansive clay that swells when wet and shrinks in drought, which moves gate posts over time. A properly installed gate here needs concrete footings sized and reinforced for that movement – deeper and wider than a typical subdivision job would use, with the post set in a bracket or embedded deep enough to resist shifting. We’ve pulled posts on Chinn Chapel Road that were set in 18 inches of concrete and tilted 4 degrees in five years. Our footings go to frost depth plus margin for the soil’s shrink-swell cycle, which is what keeps a swing gate aligned through a wet spring and a dry August. Call (817) 580-8494 for an on-site assessment of your soil and gate.
Yes, but the panel and battery bank have to be sized for the actual shade load, not for a generic solar kit. Many Double Oak driveways are lined with mature trees, and a solar opener that works in open sun will starve on a shaded run. We calculate the worst-case shade, size the panel and battery for that condition, and in some cases we recommend a hybrid setup with a trickle charger tied to existing power if it’s within a reasonable run. A solar gate opener on a shaded Double Oak driveway can run $1,200 to $1,800 all-in for the charging system alone. Call (817) 580-8494 and we’ll measure the actual sun on your driveway before quoting.
Yes, and we spec them for the actual traffic they’ll see. A double swing or double sliding gate for horse trailer access is typically 16 to 20 feet wide, built from heavy gauge tube steel or ornamental steel, with matched operators that are sequenced so both leaves move together without slamming. Many of Double Oak’s equestrian properties have exactly this setup, and we’ve installed them on properties off Chinn Chapel Road, in the Double Oak Hills area, and along Waketon Road where trailer access is a daily fact of life. A double gate for trailer access runs $7,500 to $11,000 installed, depending on width and material. Call (817) 580-8494 for a free measure and written quote.
Replacing a 1990s Elite or Apollo operator starts with checking the gate itself: hinge wear, post alignment, and whether the leaf still moves freely without the operator attached. If the gate binds or drops, the new operator will fail early. Then we remove the old unit, install the new operator – often a LiftMaster LA400 or equivalent for swing gates – and add modern safety photocells and edges, which the old units didn’t have. A basic operator replacement on a single swing gate in Double Oak runs $1,800 to $3,200 including the operator, safety devices, and labor. If the gate also needs hinge or footing work, we quote that separately before starting. Call (817) 580-8494 and we’ll give you a written number on the first visit.
Yes. We build pedestrian gates to match the height, style, and finish of your existing driveway gate, with a self-closing hinge set and a latch rated for daily use. It saves wear on the main operator, which matters on Double Oak properties where the big gate cycles 30 or 40 times a day. A standalone pedestrian gate with installation runs $1,200 to $2,800 depending on material and width. We can usually install it in a single visit at the same time as the main gate, or as a separate job. Call (817) 580-8494 for a free on-site estimate.
Contact Ironworks Gate Co. for Gate Installation in Double Oak
If you need a gate installed, replaced, or upgraded on your Double Oak property, call us at (817) 580-8494. A live person answers, day or night. We’ll schedule a free on-site estimate, walk the property with you, talk through solar versus wired power, gate width for trailers, and what’s actually needed for your soil and driveway layout. You’ll get a written price before any work begins, and every job is covered by our 90-Day Done Right Promise. Victor Salinas runs the company the same way he has for over four decades: do the work right, write the guarantee down, and answer the phone.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Double Oak and surrounding communities with dedicated gate services since 1984.