Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Access Control Across Double Oak
Gate access control in Double Oak runs $450 to $2,900 for most residential systems, depending on whether we’re adding a keypad to an existing operator or building out a full video intercom with phone entry on a 300-foot driveway. We install and repair every access method you’d expect on a Double Oak property: keypads, remotes, phone entry, card readers, and video intercoms. Same-visit repair is standard for us, not a stretch goal. If your gate won’t open from the keypad or the intercom has gone silent, call (817) 580-8494 and a live person picks up, day or night.
Why Ironworks Gate Co. Is Double Oak’s Preferred Gate Access Control Company
Double Oak isn’t a typical suburb, and we’ve never treated it like one. The town’s 1-to-5-acre lots, long private drives, and equestrian zoning mean the access systems here get worked harder and specified differently than a tract-home garage or a short subdivision driveway. We’ve been out to properties along Chinn Chapel Road and Waketon Road where a single visit involves two different gate systems: an ornamental automated entry on the front drive and a ranch pipe gate at the paddock. Most gate companies can handle one of those. We service both on the same trip.
Our technicians arrive in uniform, background-checked, and carrying parts for the major brands Double Oak homes actually run: LiftMaster, FAAC, BFT, Linear, Mighty Mule, and the older Apollo and Elite units still spinning on 1990s-era installs. Every job we complete is covered by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. You won’t argue with a call center about it.
Victor Salinas leads our gate access team. He’s spent more than four decades in this trade, and he answers the phone like he means it. Dispatch is coordinated from our Dallas-Fort Worth office, with crews serving Double Oak on a regular route so we’re not charging you an out-of-towner’s travel premium.
Our Gate Access Control Services in Double Oak
Keypad Entry
Keypad entry remains the workhorse of Double Oak gate access, especially where a homeowner needs to let in farriers, feed suppliers, pool crews, or family without handing out remotes. We install weather-sealed keypads from Linear, FAAC, and LiftMaster, and we often wire them into an existing operator rather than replacing the whole system. On Double Oak properties with a second ranch gate, we’ll frequently set up one code for the front entry and a guest code scoped to the paddock gate only.

Video Intercom
On a long Double Oak driveway, walking 300 feet to see who’s at the gate isn’t just inconvenient, it’s a losing proposition in August. A video intercom puts the visitor on your phone or an in-home monitor before you ever leave the kitchen. We install and service hardwired and wireless video intercom systems, including units that pair with existing gate operators. The question we hear most: does the gate need Wi-Fi? Not always, and we’ll cover that in detail below.

Phone Entry
Phone entry systems let a visitor press a button at the gate and ring your cell or landline. If you recognize the caller, you press a number to open the gate from wherever you are. For Double Oak homeowners with big lots, this solves the problem of a delivery that shows up while you’re at the back of the property. We install cellular-capable phone entry units on gates where a traditional phone line isn’t practical, which is the case for many ranchette-style driveways off Double Oak’s larger roads.

Card Reader
Card readers are less common on single-family Double Oak gates than keypads and intercoms, but we install and maintain them where a homeowner wants audit-trail access or card-based entry for staff, tenants, or a home office. Wiegand-style readers from Linear and HID are standard, and we can bridge older card reader hardware onto newer operators when the original installer is long gone.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Double Oak
Our Gate Access Control technicians carry programming expertise for nine major opener brands, and that matters on older Double Oak installs where the original manufacturer may have moved on. We’re factory-trained on LiftMaster and FAAC, and we keep stock on common Linear keypads, photo eyes, and receiver boards in our truck inventory. When a Mighty Mule or BFT unit fails on a Long Prairie Road property, we don’t order a part and come back next week. We usually have it on the truck.
Common Gate Access Control Problems We See in Double Oak Homes
- Swing gates binding after rain. North Texas clay soil expands when wet and contracts when dry. That heave shoves a hinge post a half-inch out of plumb and the heavy custom gate rack-springs against the operator. It’s a soil problem disguised as a hinge problem, and Double Oak sees it constantly.
- Intermittent failures on 15-to-30-year-old operators. Apollo, Elite, and Linear units installed in the 1990s are now failing in the summer heat. Circuit boards degrade, relays stick, and battery backups quit. The unit powers on but won’t respond to the keypad or the remote receiver. Often it lacks the safety-sensor compliance of a modern operator.
- Solar-assisted opener battery death. Double Oak’s heavily treed, shaded driveways may look great, but they starve solar panels of the direct sun those systems assume. By August, battery banks on solar-assisted openers are running on fumes and the operator fails exactly when you need it most.
- Ranch pipe gates with panel sag. Livestock gate panels aren’t built like driveway gates. The hinges stretch, the panel drops, and the opener’s arm binds. We weld and reinforce the hardware so the panel doesn’t just get patched; it gets corrected.
Pricing for Gate Access Control in Double Oak, TX
Here are straight numbers for the Double Oak market. A keypad add-on runs $450 to $850 installed, including programming and weatherproofing. A phone entry system on an existing gate is $700 to $1,600 depending on whether it’s cellular or landline-based. A full video intercom with a camera, in-home monitor or phone app, and gate release runs $1,400 to $2,900, ballpark for a single ornamental entry. Card readers start around $600 per reader plus installation. Every price is quoted and agreed before any work starts. You’ll see the number on paper before a bolt is turned. Estimates are free, and we offer $50 off any repair over $250. Call (817) 580-8494 for an exact quote.
We Also Serve Cities Near Double Oak
Beyond Double Oak, our crews serve gate access control customers in Southlake, Trophy Club, North Richland Hills, and Bedford. Same technicians, same written 90-Day Done Right Promise, same live-person phone support.
Serving Double Oak, TX - Our Local Coverage Area
We’re based in the Double Oak area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Double Oak
The problem is usually the post, not the hinges. Denton County’s expansive clay soils heave when they absorb water, shifting the hinge post out of plumb by a quarter inch or more. A quarter inch at the post becomes two inches of sag at the latch edge of a heavy Double Oak ornamental gate, and the operator has to fight it on every cycle. We reset the post footing, plumb the gate, and tune the operator limits so the system moves freely again, then stand behind the fix with our 90-Day Done Right Promise. Call (817) 580-8494 for an inspection.
We service them, though we’re straight with you when the cost of repair stops making sense. Many 1990s Apollo units still run, but their control boards and safety sensors are obsolete and replacement parts are getting scarce. We’ll quote the repair honestly, and if a newer operator is the better long-term call, we’ll tell you that too, with a written price before any work starts. Either way, the estimate is free.
Usually not. On Double Oak equestrian lots, pipe-gate sag almost always traces back to stretched hinge pins and a hinge post that’s been pulled by the gate’s weight over time. We re-weld the hinge barrels, straighten or replace the post, and then re-mount the panel so it swings level and latches positively. If there’s an opener, we re-set its travel limits after the alignment so it stops fighting the panel half-way through the arc.
You don’t always need Wi-Fi at the gate. Hardwired intercom systems use an Ethernet or two-wire cable run to the house, which is more reliable on a 200-to-300-foot Double Oak driveway than a flaky Wi-Fi bridge. Wireless models exist, and we install them where running a line isn’t reasonable, but we’ll advise you on the trade-offs honestly. The visitor presses a call button, you see and speak to them on a phone app or in-home monitor, and a button release opens the gate. We can often pull the wiring alongside an existing operator power run, which keeps cost down.
We check the safety sensors and the track first. Double Oak’s clay soil shifts the track or the cantilever wheels out of alignment, and a dirty or misaligned photo eye will make the operator think something is in the way. The motor is usually fine; the safety circuit is doing its job and shutting the gate down. We clean and align the photo eyes, true up the track, and re-set the operator limits. It’s a two-hour call in most cases, not a replacement. Call (817) 580-8494 and we’ll get you a time.
Need a gate access expert in Double Oak who answers the phone and stands behind the work? Call Ironworks Gate Co. at (817) 580-8494 for a free estimate. We’ll quote the price before any work begins, and you’ll get it in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Double Oak and surrounding communities with gate access control, automation, and welded gate repair.
Before
After
Before
After
Before
After