Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford usually breaks down into two very different jobs: replacing a gate that’s past saving, or resetting and re-hanging one that still has years left. Most Bedford homes were built between 1975 and 1995, so the original cedar gates are now 30 to 40 years old and fighting Tarrant County’s expansive clay. We’ve spent over 42 years in this trade, and we know exactly what that combination does to a hinge post. If your gate is sagging, binding, or simply worn out, call (817) 580-8494 and we’ll send a technician who can tell you honestly which path costs less.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Installation Company
Bedford homeowners call us because we say what we mean and then do what we said. No upselling, no mystery line items, no crew that disappears after the first rain. Victor Salinas runs our operation, and the standard he set is simple: the 400th job gets the same care as the first. Every job we finish in Bedford is protected by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands, including Linear, Viking, and Ghost Controls. That matters when a Bedford homeowner has an original 1980s opener that nobody recognizes. We answer the phone with a live person 24 hours a day, so when a gate fails at 9 p.m. and the driveway is wide open, you’re not leaving a voicemail and hoping.
We also know Bedford’s streets. The neighborhoods around Forest Ridge, the side streets off Harwood Road, the brick ranches near Central Drive. Our crews work these blocks every week. We know the clay, we know the fence lines, and we know what a 35-year-old cedar gate looks like before we even pull up.
Our Gate Installation Services in Bedford
Swing Gate Installation
Swing gates are the dominant style in Bedford, and for good reason: they follow the natural geometry of a fence line, they don’t require a long track, and they handle the post-to-post distances common in older subdivisions. But on Bedford’s black-gumbo soil, a swing gate is only as good as its posts. We set new hinge posts in deeper concrete footers than the original builders used, so the gate stays plumb through wet spring and dry August. Most swing gate installations in Bedford run $1,800 to $4,200 for a standard steel or cedar gate with heavy-duty hinges and a coated finish.
Driveway Gate Installation
A driveway gate in Bedford has to hold up to heat, clay movement, and daily cycles. We’ve installed steel and aluminum driveway gates across Bedford that still close flush years later because the posts were set right the first time. For a single steel driveway gate with a basic operator, Bedford homeowners typically pay between $3,500 and $7,500. That includes the gate build, post setting, hinge hardware, and labor. If the existing operator is a LiftMaster or BFT unit in good shape, we can often reuse it and save you several hundred dollars.
Pedestrian Gate Installation
Pedestrian gates get more cycles than any other gate on the property, and in Bedford they’re usually the first to show hinge wear. A new steel or cedar pedestrian gate with a self-closing hinge and a proper latch runs $900 to $2,200 installed in Bedford, depending on width and material. We build them to match the existing fence line so the gate doesn’t look like an afterthought.
Sliding Gate Installation
Sliding gates are less common in Bedford than swing gates, but they’re the right answer for some driveways, especially on Harwood Road area lots where a swing gate would arc into the street or block a walkway. A cantilever sliding gate with a Viking or Linear operator typically runs $5,500 to $11,000 in Bedford, including the concrete track and steel frame. We measure, order, and install these without cutting corners on the base plate or the safety edges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
Bedford driveways are home to every opener brand you can name, but the older lots near Forest Ridge still run a lot of original units that have been obsolete for over a decade. We’re trained and equipped on nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Bedford homeowners, that means one call covers diagnosis, retrofit, and installation, regardless of what’s on the gate. We stock common control boards, safety photocells, and hinge hardware locally, so most Bedford jobs are completed in one visit. The price is confirmed before any work starts, and the written offer doesn’t change once we open the gate.
Common Gate Installation Problems We See in Bedford Homes
- Clay-induced post rotation: Bedford and the surrounding H-E-B area sit on Tarrant County’s expansive black-gumbo clay, which swells when wet and shrinks when dry. Over 30 years, that cycle slowly cocks hinge posts out of plumb until a gate that closed flush in April leaves a two-inch gap by Labor Day.
- Corroded period hardware: Gates installed in the 1980s and early 1990s typically use zinc or bare steel hinges and latches that have been rusting for decades. Original automatic openers from that era also lack the entrapment protection now required under UL 325, and many are no longer serviceable.
- Warped wooden boards from DFW heat: Summer temps over 100°F combined with seasonal moisture swings cause cedar boards to warp and cup faster than in cities with sandier soil. A gate that starts at 1½-inches thick can cup half an inch at the edges within five years, throwing the latch alignment out.
- Obsolete safety systems: Gates hung before modern safety rules rarely have photo-eye sensors or proper reversing edges. That’s an easy retrofit and a real liability reduction for a Bedford home on a corner lot or near a school route.
Pricing for Gate Installation in Bedford, TX
A complete steel or aluminum driveway gate with a new operator and proper posts in Bedford typically runs $3,800 to $8,000. A pedestrian gate runs $900 to $2,200. A full double swing gate with automation on a two-standard Bedford driveway runs $5,000 to $12,000, depending largely on post depth, gate weight, and whether we’re replacing the opener or reusing a compatible unit. If the hinge posts are still solid, we can often re-hang and retrofit for under $1,500 and add years of life to the same gate. Every Bedford quote is free, written, and agreed to before any work starts. Call (817) 580-8494 for an exact number on your gate.
We Also Serve Cities Near Bedford
Bedford is our home base in the H-E-B corridor, and our crews regularly work in Bedford and the surrounding mid-cities. That includes Colleyville, Hurst, Euless, and North Richland Hills. If you’re on the edge of Bedford or just into a neighboring town, call us. We’ll confirm we can reach you and give you an honest arrival window.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bedford
The black-gumbo clay under Bedford expands when wet and contracts during the summer dry spell, which shifts the concrete footings and rotates the hinge posts. A gap that opens by two inches by late summer almost always means the posts need to be reset in deeper concrete, not that the gate frame is bad. We do that work routinely in Bedford, and the fix usually costs a few hundred dollars instead of a full replacement, which would run $1,800 and up. Call (817) 580-8494 to have us check the posts before you buy a new gate.
Yes, in most cases we can retrofit a new operator, new safety photocells, and a modern control board onto a structurally sound older gate. We regularly do this for Bedford homes with original LiftMaster or Linear units from the 1980s and 1990s. The retrofit typically costs $1,200 to $2,400 and gives the gate another 10 to 15 years without replacing the frame or hinges. We stock parts for nine major brands so the work is usually done in one visit.
No. If the wood is still sound and only the post has heaved or rotated, we reset the post in a deeper concrete footer and re-hang the gate with new heavy-duty hinges. This saves Bedford homeowners several hundred dollars over a full replacement. We got a call from a homeowner near Forest Ridge whose 1980s double swing gate wouldn’t close by August; the original 4×4 cedar hinge posts had heaved over two inches out of plumb. Our crew reset both posts, re-hung the gates, and retrofitted the existing operator with fresh safety photocells. The customer kept their gate and saved the cost of a new frame. If the boards are rotted or the frame is racked, we’ll tell you straight and quote a replacement, not a patch.
Yes. Any automatic gate opener installed today must meet UL 325 entrapment protection standards, which require photo-eye sensors on the gate path and a reversing mechanism that stops and reverses if something blocks the gate. Older Bedford gates often lack these sensors. We include them on every automation retrofit or new installation, and we test them before we leave.
For a heavy double swing gate on Bedford clay, we recommend a linear-ram or articulated-arm operator rated for the gate’s actual weight, with a soft start and stop motor to reduce stress on the hinge posts. Viking and Linear both make units that hold up well on Bedford soil. The operator should be sized for at least 20 percent more than the gate’s measured weight, because clay movement will add resistance as the posts shift slightly over the years. We spec the operator to the gate’s weight and leaf length before ordering anything.
If your Bedford gate needs a reset, a retrofit, or a full replacement, call (817) 580-8494 and ask for Victor’s team. We’ll give you a straight answer and a free written estimate before any work begins. We serve Bedford and the surrounding H-E-B corridor with the same 90-Day Done Right Promise on every gate we touch.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford, TX.