Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Southlake Homeowners
When a driveway gate stops closing, hangs crooked on its hinges, or grinds halfway open and reverses, most Southlake homeowners want one thing: a repair crew that will show up, find the real problem, and fix it without a second visit. That’s the job we’ve done in Southlake for over 42 years. We’re Ironworks Gate Co., led by Victor Salinas, and gate repair is all we do. From a sagging estate gate in Timarron to a misaligned track in Southlake Woods, our technicians arrive in uniform, diagnose the issue on the spot, and settle a clear price before any work begins. Gate Repair in Southlake means a live person answers when you call, and a written guarantee stands behind the work when we leave. Call (817) 580-8494.
Key Takeaways
- Most Southlake gate repairs are completed in a single visit with upfront pricing.
- We service nine major gate-automation brands, including BFT and Linear.
- Every job carries a written 90-Day Done Right Promise, no paperwork, no arguing.
- A live person answers our phone 24 hours a day, 7 days a week.
What Our Gate Repair Service Includes
Our Gate Repair in Southlake covers the full scope of what can go wrong on a driveway or estate gate: the motor, the hinges, the welds, the lock, and the gate’s alignment on its posts. Some jobs take 45 minutes. Others require cutting, re-welding, and recalibrating the opener. We diagnose and repair all of it, and we quote the full price before the first tool comes out of the truck.
Electric Gate Repair
An electric gate that opens halfway or refuses to budge usually points to a failing circuit board, a worn capacitor, or a dead receiver. In Southlake’s summer heat, we regularly see capacitors degrade faster than expected. We test voltage at the board, at the motor, and at the limit switch, then replace only what has actually failed. No mystery parts, no guesswork.
Automatic Gate Repair
Automatic gates are a system: the opener talks to the keypad, the safety sensors, and the loop detector in the driveway. When one component fails, the whole gate misbehaves. We test each link in that chain, from remote programming to photocell alignment. That’s how a 40-year-old automatic gate ends up closing like the day it was hung.
Hinge & Post Repair
Hinges carry the full weight of the gate every time it moves. In Southlake’s clay-heavy soil, posts shift over years and put extra strain on those hinges. We inspect for cracked welds, worn pivot pins, and posts that lean under load, then repair or reframe as needed. A gate that hangs straight is a gate that won’t burn out the opener.
Gate Realignment
A gate that scrapes the ground or misses its latch has drifted out of alignment. That means the frame, posts, or hinge points have moved. We adjust the gate’s geometry, reshim the hinges, and re-level the frame so the gate swings or slides the way it was designed to. Realignment done right eliminates the friction that eventually kills the motor.
Lock Repair
A mechanical lock on a gate works in dust, rain, and hundred-degree heat, so they do fail. We repair or replace gate locks and also handle electronic latch releases that tie into the access system. The goal is a lock that opens when you want it to and holds when you don’t.
Weld & Rust Repair
Wrought-iron gates in Southlake contend with high humidity and occasional ice, both of which feed rust. We grind out rusted sections, weld in new steel where the original has thinned, and treat the surface to slow future corrosion. This is workshop work as much as field work, and it’s where our 42 years of welding craft shows.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
BFT openers are common on Southlake estate properties. We stock a deep inventory of BFT control boards, capacitors, and limit switches, and our technicians train specifically on their hydraulic and electromechanical models. When a BFT gate faults out, we can usually carry the part needed on the first truck roll.
Linear and Ghost Controls are equally familiar territory. Linear’s swing and slide operators have enough model variation that a wrong fix is easy and a right fix takes knowing the difference. Ghost Controls, especially their newer battery and solar packages, have quirks that only show up after a specialist has worked on several. We’ve repaired and replaced parts on all three for years across Southlake and nearby areas like our Colleyville Gate Repair service. Whatever brand sits at the end of your driveway, if it opens on a motor, we’ll diagnose it.
Signs You Need Gate Repair Right Now
- The gate hesitates or reverses halfway. This is usually the safety sensor or the force setting compensating for friction. Ignoring it burns out the motor faster than anything else on this list.
- The gate sags or scrapes the drive. A hinged gate that leans has failing hinges or a shifting post. Every scrape adds load the opener was never meant to carry.
- The opener hums but nothing moves. That hum is the motor trying and failing. It could be a sheared gear, a bad capacitor, or a broken drive arm. Running it repeatedly makes a bad repair worse.
- The keypad or remote works intermittently. Intermittent is the most misleading symptom: it feels like a battery issue and ends up being a worn receiver or a corroded wire in the conduit. The longer it goes, the more parts get damaged.
- The gate slams shut or closes too hard. A gate that closes with force has no functioning limit switch or a failed speed control. That’s a safety hazard for people, pets, and cars in the driveway.
Our Gate Repair Process - Step by Step
- 1
We answer the phone. A live person takes your call at (817) 580-8494, day or night. We ask what the gate is doing (or not doing), what brand it is, and when it started. We schedule a visit that fits your day.
- 2
We inspect. Then we show you. The technician walks the gate from post to post: hinges, welds, motor, board, sensors, wires, and the ground beneath the gate. We carry multimeters, amp clamps, and load testers to read what the electrical system is actually doing. You’ll see the worn part or failed reading for yourself.
- 3
We quote the exact price. Before any work begins, you get a written price. It stands unless you decide to add scope. No material will be cut and no bolt will be turned until the number is agreed. This is the same square deal Victor Salinas has run the company by since 1984.
- 4
We do the work on the first visit. Because we stock common parts for brands like BFT, Linear, Viking, and Ghost Controls on the truck, most repairs are completed during the first appointment. That means the gate closes before the technician leaves the driveway.
- 5
We test it and stand behind it. The repair isn’t done when the gate moves. We run it open and closed, test the safety edges and reversing mechanism, then walk you through what was fixed and what to watch for. Every job leaves with our 90-Day Done Right Promise in writing.
How Much Does Gate Repair Cost in Southlake?
Best Gate Repair in Southlake, TX typically runs $180 to $850 depending on what has failed. Hinge and lock replacements usually land between $180 and $350. Operator or control board work on an automatic gate often ranges from $350 to $850. Full weld repairs or frame realignment on a large estate gate can go higher because of the steel, labor, and time involved. A gate that needs both mechanical and electrical work is usually more than a simple controller swap.
Three things shape the final number: the brand of the opener, the amount of steelwork, and whether the post or foundation has shifted. A residential gate that’s just misaligned is usually a couple hundred dollars. An iron gate with a cracked weld and a dying motor is a bigger job. We tell you exactly which one you’re dealing with before any work starts. Every estimate is free, and the price we quote is the price you’ll see on the bill. Call (817) 580-8494 and tell us what the gate is doing. We’ll tell you what it likely needs and what it should cost.
Gate Repair Near Southlake - Our Service Area
We work throughout Southlake and the neighboring cities, including Trophy Club, North Richland Hills, Bedford, Double Oak, Colleyville, Grapevine, Keller, Flower Mound, Euless, Hurst, and Watauga. Most repairs in the Southlake area can be scheduled within a day or two, and our live dispatch line takes calls around the clock. If you’re reading this from a home in Gate Repair in Trophy Club or Gate Repair in North Richland Hills, the same crew and the same promise apply.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Southlake
Gate repair means restoring a driveway or estate gate to proper working order: the hinges, welds, alignment, lock, motor, and control electronics. It’s not a new gate installation. It’s diagnosing and fixing what has worn, broken, or drifted on the gate you already have. Most repairs are done on-site in one visit.
A hinge replacement or realignment usually takes under two hours. An opener or board replacement takes one to three hours depending on the brand and model. Larger steel repair jobs can take half a day. We’ll give you a realistic time window before the work starts, and most Southlake homeowners get the gate working again the same day we arrive.
Simple mechanical repairs start around $180, while opener and control board work usually ranges from $350 to $850. The final price depends on the brand, the amount of steelwork, and whether the post has shifted. The price is written and agreed before any work begins. Call (817) 580-8494 and we’ll talk through what you’re seeing at the gate and what it typically costs to fix.
Yes, and those are among the brands we repair most often in Southlake. We train specifically on BFT hydraulic and electromechanical models, Linear swing and slide operators, Viking units, and Ghost Controls, including their solar and battery configurations. The correct fix gets made on the first visit because we know these systems from the inside.
We answer calls around the clock and schedule Emergency Gate Repair in Southlake, TX as fast as the same day in most of our service area. A gate stuck open overnight is a safety issue, and a gate stuck closed traps cars. Call (817) 580-8494 and a live person will get you on the schedule.
Every completed job carries our 90-Day Done Right Promise in writing. If something isn’t right within 90 days, we come back and make it right. No paperwork, no arguing, no exceptions. That’s the Keystone Standard, and it applies to every gate we touch.
Clear the area directly around the gate so the technician can work freely: move cars, bikes, and planters back from the swing path. If you have the opener manual or keypad instructions, set them where we can find them. And if the gate makes an unusual noise when it operates, note what you hear and when it happens. That helps us isolate the problem faster.
Schedule Your Gate Repair Service in Southlake Today
A gate that won’t close doesn’t fix itself, and the longer it runs wrong, the more expensive the eventual repair. Call (817) 580-8494 for a free estimate and upfront pricing. We’ll answer live, schedule a time that works, and put the repair in writing before anything else. Home is where the gate should work, every time.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake since 1984.