Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Flower Mound
Gate repair in Flower Mound usually runs $180-$340 for a spring or hinge fix, and $600-$1,400 when an automatic opener has failed or a post has shifted out of plumb. We get to Flower Mound homes throughout 75022, 75027, and 75028, typically same-day or next-morning for non-working gates. Ironworks Gate Co. has been repairing driveway and estate gates for over 42 years, and we know what Flower Mound’s clay soil and HOA rules do to a gate. Call (817) 580-8494 and a live person answers, any hour, any day.
Why Ironworks Gate Co. Is Flower Mound’s Preferred Gate Repair Company
Flower Mound homeowners don’t call us because their gate is new. They call because the builder-grade opener that came with the house in 2004 finally gave out, or because the gate hasn’t closed square since the last big rain. We’ve worked on hundreds of gates in Bridlewood, Wellington, and the master-planned communities that make up most of this town, and our technicians show up knowing what they’ll find before they park the truck.
Victor Salinas leads our crews, and he’s the kind of tradesman who would rather explain exactly what’s wrong than sell you something you don’t need. Our Flower Mound customers consistently tell us the same thing: the price quoted on the phone was the price on the bill, and the gate worked when we left. Every job is protected by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
We also understand the HOA reality in Flower Mound better than any generalist handyman. When your HOA requires the replacement opener to match the existing ornamental ironwork, we handle that. When they want the keypad code sequence kept the same, we do that. And when the gate is at the entrance to a community rather than a single driveway, we coordinate the work so residents aren’t locked out or left open overnight. Our Gate Repair team works within your subdivision’s guidelines, not around them.
Our Gate Repair Services in Flower Mound
Electric Gate Repair
Electric gate repair in Flower Mound usually means a failed control board, a burnt-out capacitor, or wiring that’s no longer delivering consistent voltage. Many homes here run LiftMaster and Elite operators from the mid-1990s through the 2010s, and those control boards are reaching end of life at the same time across entire neighborhoods. We diagnose the electrical fault, tell you honestly whether the board can be replaced or the whole operator should go, and quote the price before we touch anything.
Automatic Gate Repair
Automatic gate repair in Flower Mound often ties back to the freeze. After February 2021, many HOA entrance gates in the 75022 and 75028 ZIP codes were retrofitted with freeze-rated operators, but the old conduit and wiring was reused in a lot of cases. Undersized wiring causes voltage drop, and voltage drop causes intermittent failures that look mysterious. We find those. We test the circuit under load, not just with a meter, because a gate that works on Thursday and dies on Saturday has a load problem, not a ghost.
Hinge & Post Repair
Flower Mound sits on Blackland Prairie clay that swells in spring and shrinks in the July and August heat. That movement works gate posts out of plumb over time. A sagging gate is almost never the panel’s fault. It’s the post leaning a few degrees, or the hinge barrel worn oval from years of carrying extra weight. We dig out the old footing, reset the post in fresh concrete, and hang the gate so it swings true again. In Bridlewood and Wellington, we also match the finished hardware so it doesn’t look newer than the rest of the fence line.
Gate Realignment
This is the most common call we get from Flower Mound homeowners. The gate closes partway, reverses, or drags on the ground at the latch side. Nine times out of ten, the post has moved, or the operator’s limit switches are out of adjustment. We realign the gate on the hinges, true up the post if needed, and reset the travel limits so the operator isn’t fighting the gate. We also check whether the ground under the gate has heaved enough to require a new concrete pad or a re-graded track for slide gates.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Flower Mound
We service and install LiftMaster, Elite, FAAC, and Mighty Mule openers, plus five other major automation brands. That means we don’t have to tell you to replace a perfectly good FAAC because we’re only comfortable with one manufacturer. We carry common control boards, limit switches, and photocells on our trucks, so most Flower Mound repairs are finished in a single visit. When a part is obsolete, we’ll tell you that plainly and give you options, including remanufactured boards from our suppliers when they’re available.
Common Gate Repair Problems We See in Flower Mound Homes
- Builder-grade operators failing at once across whole neighborhoods. Homes built between the mid-1990s and 2010s got LiftMaster and Elite units that are now 15-25 years old. Control boards fail, gearboxes strip, and the repair parts haven’t been made in years. We replace them with current units that fit the existing footprint, and we handle the HOA approval paperwork when your subdivision requires it.
- Clay soil shifting gate posts every season. The Blackland Prairie clay under Flower Mound expands after spring rain and contracts in the summer heat. That cycle tilts posts a little more each year until the gate won’t latch. It’s not a one-time fix. We reset the post and then set the operator limits so the gate tolerates a little seasonal movement without throwing itself out of adjustment.
- Voltage drop from post-freeze retrofits. After Winter Storm Uri, a lot of HOA entrance gates got new freeze-rated operators but kept the old undersized conduit and wiring. Those circuits run hot and drop voltage under load, especially in the 75028 area. We test the full run, upgrade the wire where needed, and stop the intermittent failures.
- HOA-mandated material matching on repairs. In neighborhoods like Bridlewood and Wellington, the architectural guidelines often require repair work to match the original wrought-iron scroll patterns and powder-coat finish. That turns what looks like a simple opener swap into a custom fabrication job. We do that work in-house, and we’ve matched enough scroll patterns over the years to know what your HOA will and won’t accept.
Pricing for Gate Repair in Flower Mound, TX
A straightforward gate realignment in Flower Mound typically runs $180-$320. Hinge replacements and post resets land in the $350-$700 range depending on how much concrete work is involved. Full electric gate repair, including a new control board and safety photocells, usually runs $500-$1,100. A complete operator replacement with a new LiftMaster or FAAC unit, including labor and disposal of the old motor, typically falls between $900 and $1,400. The price you’re quoted is the price you pay. We settle it before a single bolt is turned, and we offer a free second opinion on any written estimate from another company. Call (817) 580-8494 and we’ll give you an exact number for your gate before anything is scheduled.
We Also Serve Cities Near Flower Mound
Our crews work throughout Denton and Tarrant counties, including regular service in Southlake, Coppell, Grapevine, and Colleyville. If you’re just outside Flower Mound proper, call us and we’ll tell you straight whether we can get to you same-day. More details on our service area are on the Flower Mound page.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Flower Mound
The soil moves, and your gate moves with it. Flower Mound sits on Blackland Prairie clay that swells after spring rain and shrinks during the summer dry spell. Your gate posts are set in that soil, and each cycle tilts them a little more until the latch doesn’t line up or the operator’s limit switches are fighting the position. The fix is usually a post reset or a limit-switch adjustment, but we also check the concrete footings because shifting soil can crack them and make the problem repeat every year. Call (817) 580-8494 and we’ll come look at it.
You need to know what your HOA’s architectural guidelines require before you buy anything. Many Flower Mound subdivisions, particularly the planned communities, require replacement hardware to match the original finish and style. That can mean a specific powder-coat color, a particular scroll pattern on the bracket, or an approved opener brand. We’ve worked through HOA approvals across Flower Mound and we’ll help you prepare the submittal, install per the approved spec, and handle the follow-up inspection if your HOA requires one.
Most of the failures we trace back to wiring, not the opener itself. During the Uri retrofits in Flower Mound, many HOA entrance gates got new freeze-rated operators but reused the old conduit and undersized wire from the original install. Undersized wire causes voltage drop under load, and voltage drop kills control boards over time. We see this concentrated in the 75022 and 75028 ZIP codes. The fix is rewiring the run to match the new unit’s draw, not replacing the opener a second time.
Expect 12 to 18 years for a builder-grade LiftMaster or Elite unit, and 15 to 25 for a better-quality FAAC or similar. The problem in Flower Mound is timing. Entire subdivisions built in the mid-1990s through the 2010s are hitting end of life at the same moment, which is why so many of our recent calls have been for dead operators that can’t be repaired because the control boards are obsolete. If your unit is in that window, we’ll tell you whether it’s worth repairing or whether replacement is the honest answer.
Yes, almost always. A sagging gate is usually a post that has leaned in the clay soil, a worn hinge barrel, or both. The panel itself is rarely the problem. We reset the post in new concrete, replace the hinges with ones rated for the panel weight, and hang the gate so it closes square. In Bridlewood, we also match the original finish so the repaired section doesn’t stand out from the rest of the fence. Call (817) 580-8494 for a free estimate.
One More Thing About Flower Mound Gates
Our crew was called to a 2004 two-story in the 75028 ZIP after the original LiftMaster slide gate operator finally died during a July heatwave. The builder-grade unit had been struggling for years, tripping the breaker on hot afternoons, and the gate’s post footing had shifted with the clay soil, throwing the rack and pinion out of alignment. We removed the dead opener, poured a new post footing after realigning the hinge post, and installed a freeze-rated FAAC operator with a fresh loop detector and safety photocells. Then we reprogrammed the keypad entry to match the HOA’s approved code sequence. The gate closes like it was hung yesterday. That’s the job, done right, and it’s the kind of work we do in Flower Mound every week.
If your gate is sagging, stuck, sparking, or simply not answering the remote, call (817) 580-8494. A live person answers 24 hours a day. We’ll give you a straight answer, a free estimate, and if you want us to come out, we’ll be there when we say. Ironworks Gate Co. has stood behind every gate we’ve touched for over 42 years, and we’ll stand behind yours.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Flower Mound and the surrounding North Texas communities.