Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bartonville
If you live in Bartonville, you already know the problem: a 16-foot ornamental iron gate does not forgive a hinge that is out by half an inch. It drags, it binds, the operator strains, and eventually something fails. We handle Gate Installation - Bartonville and repair and replace gate parts across Bartonville every week, and most jobs are completed in a single visit. Call (817) 580-8494 and a live person answers, 24 hours a day, every day. Victor Salinas and our crews know what Blackland Prairie clay does to a buried gate post, because we have been correcting it for over 42 years.
Bartonville is almost entirely zoned for 2-to-10-acre equestrian and estate properties. That means virtually every home sits behind a long private driveway with a heavy automated gate. Those wide, oversized gates put sustained stress on hinges and posts that standard residential hardware is not built to carry. When a hinge post heaves with the soil, the gate goes out of plumb and the latch side drags. When an ice storm freezes an operator gearbox, someone forces the gate by hand and strips the drive. These are Bartonville failure patterns, not generic driveway problems, and we repair them with welding and replacement parts selected for the load.
Why Ironworks Gate Co. Is Bartonville’s Preferred Gate Parts & Welding Company
We have been repairing, welding, and rebuilding gates for over four decades, founded in 1984. In that time we have worked on more Bartonville acreage entrances than we can count, from wrought-iron swings on Jeter Road to heavy cedar ranch gates off McMakin Road. Homeowners in Bartonville and nearby Southlake and Trophy Club call us because the job gets done right the first visit, and because every completed job is protected by our written 90-Day Done Right Promise, known internally as the Keystone Standard. If it is not right, we return and make it right. No paperwork, no argument.
Our technicians are background-checked and uniformed. They work in your driveway the way they would work in their own mother’s. A live person answers our phone around the clock, not a voicemail tree. When you call about a gate dragging on the caliche, you speak to someone who knows what that phrase means. We carry parts for Bartonville’s common gate brands on the truck, so most hinge replacements, post resets, and rail welds are completed on the spot.
For full service detail across the metro, see our Gate Parts & Welding hub page. For everything specific to this area, this Bartonville page is where we cover the local conditions that decide how a gate should be fixed or rebuilt.
Our Gate Parts & Welding Services in Bartonville
Hinge Replacement
Swing gates in Bartonville commonly span 16 to 20 feet. That is a lot of steel or cedar hanging on two or three hinge points. When the Blackland Prairie clay swells with spring rain and shrinks in the August heat, the post moves and the hinge takes the full twist. We replace worn barrel hinges, weld in heavy-duty adjustable hinges on wider gates, and re-hang the gate so it holds alignment through a full wet/dry cycle. Never a temporary shim job.
Post Replacement
A leaning post is the root cause of most Bartonville gate failures. The fix is not bracing it. The fix is digging out the old post, cutting back to undisturbed soil, and setting a new steel post in a deeper footing below the active clay zone, then welding the gate back onto a plumb line. We do this with concrete and depth appropriate to the gate width and weight. On equestrian properties, we know the post must survive horses leaning against the gate and trucks passing within inches of it.
Rail Repair
Ornamental iron and steel gates in Bartonville take hits. A trailer clips the bottom rail. A horse kicks a picket. The top rail cracks at a weld joint from years of wind load on a 19-foot span. We cut out the damaged section, weld in matched steel, grind the repair smooth, and match the finish so the patch does not read as a patch. For rusted-through cedar ranch gate frames, we rebuild the steel skeleton and re-skin it so the gate carries its original look.
Custom Welding
Some jobs cannot be fixed with off-the-shelf parts. A custom gate that was built with the house in the 1990s often needs a one-off hinge bracket, a stretched operator arm mount, or a rebuilt cantilever roller carriage. Our welding shop fabricates these on site or in our DFW facility, matched to the existing gate. Bartonville homes with equestrian facilities sometimes need pass-through gates, pasture gates, or custom latch posts welded to match the main entrance. We build steel the way a blacksmith would: strong, straight, and meant to stay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bartonville
We are trained and equipped on nine major gate-automation brands, including LiftMaster, FAAC, and Elite, and we service our Gate Motor & Opener in Bartonville systems. That matters when a gearbox freezes in a Denton County ice storm and the homeowner has already forced the gate by hand. We arrive knowing the bolt pattern, the limit switch logic, and the torque curve of the operator on the driveway, so the repair is correct the first time. For Bartonville customers we keep common drive components and bracket kits stocked locally, which shortens the time between diagnosis and a working gate.
Common Gate Parts & Welding Problems We See in Bartonville Homes
- Seasonal hinge misalignment. Bartonville sits on North Texas Blackland Prairie clay. It swells when wet and cracks when dry, and a buried gate post can move visibly between October and April. The first call of each season is almost always a swing gate now dragging the ground on the latch side.
- Ice-stripped operator drives. When a winter storm freezes an operator gearbox or hydraulic arm, the gate will not move under power. Forcing it manually strips rack and pinion teeth, bends hinge hardware, and sometimes shears the arm mounting bolts. We see this every hard freeze in Bartonville.
- Sagging wide gates. Heavy ornamental steel or cedar ranch-style gates on 16-to-20-foot spans overload standard hinges and develop a visible sag. The latch no longer lines up, the operator labors, and eventually something gives. Sag correction with heavier-rated hardware is a regular Bartonville repair.
- Failing cantilever and slide gate rollers. Rural Bartonville driveways often run over caliche or gravel, which produces fine dust that works into roller bearings. When rollers seize and the gate jumps the track, the damage usually extends to the welded track brackets themselves.
Pricing for Gate Parts & Welding in Bartonville, TX
In Bartonville, a hinge replacement for a standard swing gate typically runs $180 to $340 per hinge, depending on gate weight and whether welding is required to reset the bracket. Post replacement, including digging out the old post, setting a new steel post below the active clay zone, and re-hanging the gate, generally costs $600 to $1,600 depending on gate width, post size, and access. Rail repair and crack welding on ornamental iron usually lands between $200 and $650 per rail. Full custom welding projects are quoted after we see the gate. Every price is quoted and agreed before any work starts. No surprises on the bill. We also stand behind a standing $50 off any repair over $250, a free second opinion on any written estimate from another company, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
We Also Serve Cities Near Bartonville
Along with our work across Gate Parts & Welding in Bartonville, our crews regularly serve Southlake, Trophy Club, North Richland Hills, and Bedford. The drive from our dispatch center in the Dallas-Fort Worth metro area is short enough that most Bartonville calls are reached the same day they are booked. A quick call gets you on the schedule.
Serving Bartonville, TX - Our Local Coverage Area
We’re based in the Bartonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bartonville
The clay under your gate post expanded and lifted the post by a fraction of an inch. Blackland Prairie soil swells several inches when saturated, and that small movement at the post translates into a large drop at the latch on a 16-to-20-foot gate. The permanent fix is resetting the post in a deeper footing below the active clay zone and re-hanging the gate on a plumb line. Call (817) 580-8494 and we will come assess whether you need a hinge realignment or a full post replacement, with a written quote before work begins.
Most rail cracks on Bartonville gates are welded on-site. We bring a mobile welding rig, cut out the cracked section, weld in matched steel, grind the joint, and finish it to blend with the existing gate. A shop visit is only needed for large fabrication jobs, and we will tell you up front if that applies to your gate. Estimates are free.
Both are workable, but many Bartonville acreage properties choose solar because running line power down a 300-foot driveway is expensive. Solar operators from brands like Mighty Mule and LiftMaster have improved, but they need correctly sized panels and batteries to run a heavy 16-foot gate through Denton County’s cloudy winter weeks. We install and wire both solar and line-power operators, and we will give you a straight recommendation for your driveway length and gate weight. Call (817) 580-8494 for a free estimate.
Usually both. Frozen ground shifts the track slightly, and if the rollers are already worn from caliche dust or gravel grit, the gate climbs off. The repair is new rollers plus a welded re-alignment of the track brackets, and sometimes a re-bedded track section. We handle the whole job in one visit for most Bartonville slide gates. Call (817) 580-8494 and we will diagnose the track before quoting the fix.
After post replacement, the gate’s travel path changes, so the safety loops, photo-eyes, and reversing sensors must be re-tested and often re-aimed. Our crew verifies entrapment protection as part of every post replacement. Working on gate operators and high-tension hardware is genuinely dangerous, so we recommend a trained professional for any repair involving motor torque or spring tension, including Gate Access Control in Bartonville systems. Call (817) 580-8494 and we will test the full safety system after the structural work is done.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bartonville and the surrounding DFW metro area with gate repair, welding, and automation since 1984.