Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Keller
If your driveway gate in Keller has stopped opening or is grinding, lurching, or reversing mid-cycle, the operator is usually the culprit – and it’s a fix we handle the same day in most 76244 and 76248 neighborhoods. A gate motor replacement in Keller typically runs $650-$1,150 for the operator and labor, depending on whether we’re swapping a linear arm on a swing gate or a chain-driven slide motor. We dispatch from our Dallas-Fort Worth office with crews stationed to serve Keller directly, so you’re not waiting on a truck from across the metroplex. Call (817) 580-8494 and a live person answers – not a voicemail tree, not an answering service. We’ll schedule a technician who knows Keller’s gates, Keller’s HOAs, and Keller’s clay soil by heart.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Motor & Opener Company
Keller homeowners call us for a simple reason: our technicians understand what actually fails on the gates in this city. We’re not generalists who dabble in gates between garage door calls. Ironworks Gate Co. has been fixing automated driveway gates for over 42 years, and we’re trained and equipped on nine major operator brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when your Keller home still runs an original 1999 Apollo actuator that no one stocks parts for locally except us.
Victor Salinas leads our team with a tradesman’s approach: diagnose accurately, quote upfront, fix it once. Our technicians are background-checked and uniformed, and they work under the K.E.Y.S. code – Krafted right, Every time, Your home first, Standing behind it. Every job, from a $89 seasonal tune-up to a full operator replacement on a Marshall Ridge swing gate, carries our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions. Keller homeowners remember the last contractor who overpromised. We’d rather be the last gate company you need to call.
We know that in Keller, most of the gates we service are ornamental wrought iron swing and slide gates on large-lot homes built between the late 1990s and 2010s. The operators on these gates are hitting the 15-to-25-year mark now – which is exactly when linear actuators and circuit boards start failing in predictable patterns. We can often tell you what’s wrong before we pull into the driveway.
Our Gate Motor & Opener Services in Keller
Motor Repair
When a gate motor in Keller fails, the cause is rarely mysterious to us. We see storm-surge damage on control boards after spring thunderstorms roll through Tarrant County, thermally degraded capacitors from two decades of Texas heat, and burned-out motors that have been fighting post heave from the black clay that shifts under Keller footings every wet-dry cycle. We repair operators on every major brand, and most repairs are completed in a single visit. If your gate is dead after a storm near Bear Creek Park or Hidden Lakes, call us at (817) 580-8494 and we’ll have a technician out the same day.
Motor Installation
Full operator replacement on a Keller home means matching the new motor to the gate’s weight, leaf length, and duty cycle. We install heavy-duty residential operators from LiftMaster, BFT, and Linear, sized correctly for the long, heavy iron gates common in the 76248 corridor. Every installation includes limit-setting, safety photocell alignment, and force calibration so the gate closes reliably without crushing anything. The price is quoted and agreed before we turn a single bolt – you’ll never open an invoice that surprises you. If your Keller HOA requires architectural approval for the operator swap, we file the compliance paperwork as part of the job.
Linear Motor
Linear arm actuators are the most common operators on Keller’s swing gates, and the 2000s-era Linears we pull out of Hidden Lakes and Marshall Ridge tell a consistent story: the arm’s internal gears stripped after years of pushing against a gate that the clay soil had pushed out of plumb. We stock replacement Linear arms and full operator kits locally, so a same-day swap is usually possible. When we install a new Linear on a Keller gate, we check the post alignment first – because installing a fresh motor on a leaning post just sets you up for the same failure in three years.
Slide Motor
Slide gates in Keller require a different setup than swing gates: a chain- or rack-driven motor mounted on a concrete pad, with limit switches at both ends. The black clay that works on swing posts also shifts slide tracks and pads, so we regularly find slide motors binding against a track that’s moved a half-inch out of line. We service and replace slide operators from FAAC, Viking, and Ghost Controls, and we reset track alignment and pad elevation before the new motor goes in. On gated communities with shared entry, we coordinate with the property management company so residents aren’t locked out during the replacement.
Battery Backup
Keller’s spring thunderstorm season exposes a hard truth: a gate with no battery backup is a gate that’s dead when the power goes out. We install and retrofit battery backup systems onto existing operators so the gate keeps working through outages – a real safety issue for residents who need to get out during severe weather. Battery backup also protects the control board from the low-voltage sags that damage electronics before the power fully drops. If your linear actuator or slide motor predates 2010 and has no backup, this is one of the first upgrades we recommend.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We service and install operators from nine major brands, and for Keller homes, the ones we see most often are Linear, LiftMaster, and BFT. Your 2004 Linear actuator is still repairable in many cases, and we carry the parts. If you’re running a Viking or Ghost Controls slide motor, we stock the gears and boards those units need. Being certified on all these brands means we diagnose correctly the first visit – not after three trips and two wrong parts. Our Gate Motor & Opener team keeps common Keller-specific parts on the truck: Linear arms, control boards, photocell kits, and battery backup modules. That’s why most Keller jobs wrap up in one appointment.
Common Gate Motor & Opener Problems We See in Keller Homes
- Post heave from Keller black clay. The expansive clay under Tarrant County shrinks and swells with the seasons, pushing gate posts out of plumb. A motor that’s suddenly laboring or tripping its breaker is often fighting a binding gate, not failing on its own. We reset the footer before replacing the operator, or the next motor dies the same way.
- Storm-surge damage to control boards. Spring thunderstorms bring lightning and line surges that fry the boards on older Linear and Apollo operators. The gate is dead after the storm passes, and sometimes the board is the only casualty. We keep replacements ready during storm season because we know Keller’s surge failures follow the weather.
- Degraded safety photocells from Texas heat. The original 1990s-era photocells on Keller gates bake in direct sun for 25 years, and eventually they start triggering false stops. The gate reverses for no reason, or refuses to close. HOA landscape crews usually blame the operator, but the fix is often a $40 photocell pair we stock on the truck.
- Worn gears in original linear arms. Keller’s late-1990s and 2000s buildout put a lot of Apollo and Linear arms on driveway gates, and those internal gears are now stripped or cracked. A gate that hums but won’t move is the classic call. We swap the arm or the whole operator, and the gate runs like it did in 2003.
Our crew recently replaced a 2003 Linear actuator and heaving hinge post on a swing gate in the Marshall Ridge subdivision. The gate wouldn’t open after a spring storm, but the real culprit was two decades of Keller black clay shifting the post out of plumb. We reset the footing and installed a LiftMaster operator with battery backup before the HOA’s final inspection. That’s the kind of job we do routinely across Keller, because in this city, the motor is rarely the only thing that failed.
Pricing for Gate Motor & Opener in Keller, TX
| Service | Typical Range in Keller |
|---|---|
| Gate motor diagnosis | $89-$135 |
| Motor repair (board, gear, capacitor) | $180-$450 |
| Linear arm actuator replacement | $420-$780 |
| Full operator replacement (swing or slide) | $650-$1,150 |
| Battery backup retrofit | $195-$390 |
| Photocell replacement | $85-$150 |
Repair labor in Keller runs $95-$125 per hour, and most repairs wrap in under two hours. Full operator replacements depend on gate weight, post condition, and whether we need to reset a footing before the new motor goes in. Every quote is written, itemized, and agreed before work starts – no surprises on the invoice. We honor three standing offers for Keller homeowners: $50 off any repair over $250, a free second opinion on any written estimate you’ve received, and an $89 seasonal tune-up that includes limit checks, force calibration, and photocell cleaning. Seniors and veterans always get an additional 5% off. Call (817) 580-8494 for your free estimate.
We Also Serve Cities Near Keller
We work throughout northeast Tarrant County. If you’re in North Richland Hills, Southlake, Colleyville, or Hurst and need a gate motor or opener, we dispatch the same crews that serve Keller daily – and we file HOA compliance paperwork anywhere it’s required. The 90-Day Done Right Promise covers every job in every city.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Keller
In most Keller HOA-governed communities, yes – replacing a gate operator often requires an architectural review application first, especially if the gate is visible from the street or shared with neighbors. The approval typically covers the operator type, gate finish, and sometimes the height, even when the gate itself isn’t changing. We file the compliance paperwork with your HOA or management company as a standard part of the job, because in Keller it’s routine for us and completely unfamiliar to technicians from less deed-restricted cities like North Richland Hills or Watauga. Call (817) 580-8494 and we’ll help you figure out what your specific HOA requires.
Two Keller-specific forces hit your gate every spring: expansive black clay and electrical surges. The clay swells after heavy spring rain, shifting your gate posts slightly out of plumb and putting extra strain on the operator, while lightning and line surges take out control boards on older units. The combination means your motor burns out faster, and the board fries more easily, than the same equipment would in a city with sandier soil and fewer storms. We stock surge-hardened boards and battery backup modules for Keller’s storm season, and we can tell you whether your failure is electrical, mechanical, or both. Call (817) 580-8494 for a diagnosis that actually explains what failed.
Yes – most Linear actuators from the 2000s can accept a battery backup retrofit, and it’s one of the best upgrades you can make on a Keller gate. The backup keeps the gate operating through the power outages that follow Keller thunderstorms, which matters when you need to leave during a weather event. It also smooths out voltage sags that shorten the life of your control board. We install backup systems daily, often in the same visit as a motor repair, and the price is quoted before we start. Call (817) 580-8494 for a free estimate on your specific operator.
The first sign is usually a gate that’s slower than it used to be, or an operator that keeps tripping its breaker or thermal cutout. When the post shifts out of plumb, the hinge binds, and the motor has to work harder every time it cycles. The strain burns out windings and strips gears. If your gate is making a grinding sound or the movement looks jerky near the closed position, you’re likely seeing post movement, and replacing the motor without fixing the footing is throwing money away. We check post alignment on every Keller repair as standard practice. Call (817) 580-8494 and we’ll tell you what’s really going on.
Yes – we handle intercom integration for Keller communities with guard gates, resident directories, and shared entry systems, including wiring the operator to the intercom’s relay output so residents can open the gate from a phone or in-unit panel. It’s common in the gated sections of Keller’s newer neighborhoods, and we coordinate directly with property management so the system stays live during the work. We also ensure the operator’s obstacle detection and safety edges stay functional when intercom controls are wired in. Call (817) 580-8494 and we’ll schedule a site visit to your Keller community.
If your Keller gate motor is acting up, call us at (817) 580-8494. A live person answers, we’ll schedule a technician who works in Keller every day, and we’ll give you a written, upfront quote before any work begins. Done right, backed in writing, and built for Keller’s clay, storms, and HOAs.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller with the 90-Day Done Right Promise.