Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Double Oak
Gate motor and opener service in Double Oak means dealing with heavy ornamental steel gates at the end of 200-foot driveways, aging 1990s operators that predate modern safety standards, and the shifting North Texas clay that quietly misaligns everything. Most repairs here run $180 to $340, and we can typically have a technician at your Double Oak property the same day you call. If your gate is stuck, grinding, or simply won’t respond to the remote, call (817) 580-8494 and we’ll get you sorted. Ironworks Gate Co. has been at this for over 42 years, and we’ve seen just about every failure mode a Double Oak gate can throw at a homeowner.
Key Takeaways
- Double Oak is different. 1-5 acre lots, custom gates, 15-30 year old operators, and expansive clay soil create repair patterns you won’t see in a typical subdivision.
- We answer the phone. A live person, 24 hours a day. Not a voicemail tree.
- Most jobs in one visit. Our trucks carry parts for LiftMaster, FAAC, Elite, Linear, Mighty Mule, and more.
- Written guarantee. Every job is covered by our 90-Day Done Right Promise.
- Free estimates. The price is quoted and agreed before any work starts. No surprises on the bill.
Why Ironworks Gate Co. Is Double Oak’s Preferred Gate Motor & Opener Company
Double Oak isn’t a typical DFW suburb. It’s one of the few incorporated towns in the metro that held on to its equestrian, large-lot character, and that shapes the gates we work on every week. We’re not showing up to a cookie-cutter HOA entrance. We’re showing up to a property on Chinn Chapel Road or Simmons Road where the automated entry gate is as much a piece of the home’s architecture as the front door, and the ranch gate out back has to work just as reliably as the ornamental slide gate up front.
Victor Salinas, who leads our team, has spent years learning the specific ways Double Oak gates fail. The 1998 Apollo swing operator that’s still running on one side of town and grinding itself to death on the other. The builder who never bothered to run conduit, so the homeowner is stuck with a solar panel that can’t keep a battery alive through July. These are Double Oak problems, and we know how to fix them correctly the first time.
Our technicians are background-checked and uniformed. We work in your home the way we’d work in our own mother’s. Every call gets a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing. That’s the deal we’ve offered for years, and it’s why Double Oak homeowners keep our number.
Our Gate Motor & Opener Services in Double Oak
We handle the full scope of gate automation for Double Oak properties, including Gate Motor & Opener service across the board. Here’s what that looks like on the ground here.
Motor Installation
Whether you’re automating a gate the builder left manual or replacing a failed operator on an existing automated gate, we install for the long haul. In Double Oak, that often means trenching a proper conduit run from the house panel to the gate post so you’re not depending on a solar panel that underperforms on a shaded driveway. We quote the whole job up front: motor, wiring, safety sensors, and labor. The number we give you is the number you pay.
Motor Repair
We repair operators from Elite, Linear, LiftMaster, Apollo, FAAC, Mighty Mule, and more. Many Double Oak gates are running 15 to 30 year old units that are worth repairing rather than replacing, especially if the gear teeth, limit switches, or capacitors are the failing part. We’ll tell you straight whether a repair makes sense or whether a new motor is the better long-term spend for your Double Oak driveway.
Linear Motor
Linear gate operators are common on Double Oak’s slide gates, especially on wider driveway openings where a swing gate would eat too much of the yard. These motors wear out their gears and capacitors just like anything else, and the fine dust from Denton County’s semi-rural roads gets into the housing and accelerates wear. We stock Linear-compatible parts and can usually turn around a repair in one visit.
Slide Motor
Double Oak properties with long driveways often use slide gates, and those slide motors take a beating. Clay soil heaving shifts the track, the chain stretches, and the motor strains against weight it was never sized for. We diagnose the root cause, not just the symptom. If your slide gate is binding, we fix the track alignment and the motor together so you’re not back in the same spot six months from now.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Double Oak
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Double Oak homeowners, that matters because a 1990s Elite unit on one side of town and a newer LiftMaster on the other require different diagnostics, different parts, and different repair techniques. Our trucks carry repair parts for the brands we see most often in Double Oak, which is why most jobs get done in a single visit. Whether it’s a FAAC board that’s gone bad or an Elite gear that’s finally stripped, we can usually fix it on the spot.
Common Gate Motor & Opener Problems We See in Double Oak Homes
- Builder-grade operators failing early. Double Oak’s large-lot custom homes often got undersized gate motors during original construction. The motor was never sized for the heavy ornamental steel gates common here, so they burn out bearings and strip gears years before a properly sized unit would. We replace them with operators matched to the gate’s actual weight and duty cycle.
- Missing or undersized conduit runs. Many Double Oak builders didn’t run conduit to the gate during construction, or ran something too small to be useful. That forces homeowners into solar-powered openers, and a shaded driveway in Double Oak means those batteries die hard every summer. We trench proper schedule 40 PVC conduit so you can connect to house power and stop chasing battery replacements.
- Safety sensor compliance on aging operators. A large share of the operators in Double Oak are 15 to 30 years old and predate modern UL 325 entrapment protection standards. Photocells and edge sensors weren’t standard on late 1990s and early 2000s units. We retrofit these systems with current safety equipment, which matters for your family, your horses, and anyone who uses your driveway.
- Expansive clay soil racking gates out of alignment. North Texas clay heaves and contracts dramatically with seasonal moisture. In Double Oak, that means swing gates drift out of square and the operator’s rack and pinion binds, burning out motors that would otherwise last years. We don’t just swap the motor; we correct the post alignment so the new one isn’t fighting the same fight.
Pricing for Gate Motor & Opener in Double Oak, TX
Here are honest numbers for Double Oak, so you know what to expect before you call.
- Motor repair (typical): $180-$340, including the service call and most parts like capacitors, limit switches, and remote receivers.
- Motor replacement: $650-$1,400 depending on gate weight, operator brand, and whether we’re reusing existing wiring or trenching new conduit.
- Full automation of a manual gate: $1,600-$3,200. This includes the operator, safety sensors, post mounting, and electrical work.
- Safety photocell retrofit: $220-$450 per gate when adding entrapment protection to an older operator.
- Battery backup replacement: $120-$280 for most solar-assisted or backup systems common on Double Oak’s long driveways.
- Seasonal tune-up: $89 flat. Includes lubrication, limit adjustment, chain/belt tension check, and sensor cleaning.
The price you’re quoted is the price you pay. We walk the job, we quote it, we agree on the number, and then we do the work. If we find something unexpected mid-repair, we stop and call you before adding anything to the bill. That’s how we’ve done business for 42 years.
We also offer $50 off any repair over $250 and a permanent 5% discount for seniors and veterans. If you’ve got a written estimate from another company, bring it to us for a free second opinion.
We Also Serve Cities Near Double Oak
Our Double Oak work often takes us across the town line into Southlake, Trophy Club, North Richland Hills, and Bedford. If you live in Double Oak proper or any of the nearby communities, the same technicians, the same written warranty, and the same 24-hour live answering apply. Call us and we’ll get you on the schedule.
Serving Double Oak, TX - Our Local Coverage Area
We’re based in the Double Oak area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Double Oak
Expansive clay soil heaves when wet and contracts when dry, which shifts your gate posts out of alignment over time. That puts side load on the motor and gear train, causing binding, stripped gears, and premature motor failure. In Double Oak we see this on both swing and slide gates, and the fix is correcting the post or track alignment before installing a fresh motor, otherwise the new one burns out the same way the old one did. Call (817) 580-8494 for a site assessment and a straight answer.
Most likely not. Operators from the 1990s typically lack modern UL 325 entrapment protection, which means no photocells and no reversing edge sensors. If a child, a dog, or a horse is in the gate’s path, the gate won’t stop. We retrofit older Elite and Linear units in Double Oak with current safety sensors that meet today’s standards, so your gate is as safe as it is functional. Give us a call and we’ll check what you have.
Because a shaded solar panel can’t replenish the battery, and Double Oak’s 100°F summer heat accelerates battery degradation on top of that. The circuit boards in solar-assisted operators also run hotter, which shortens their life. The long-term fix is trenching a proper line from your house panel to the gate so you’re not depending on solar at all. We can quote you that work; call (817) 580-8494 for a free estimate.
Yes. A stuck-closed gate on a long Double Oak driveway means you’re locked out of your own property, and we treat that as an emergency. We prioritize Double Oak calls where the gate is blocking access, and a live person answers our phone 24/7. Call (817) 580-8494 and tell us what’s happening; we’ll get a truck rolling toward Double Oak as soon as possible.
Adding a motor to a manual gate involves sizing the operator to the gate’s weight, installing the motor and arm or rack, adding safety sensors, and getting power to the gate. In Double Oak, many builders didn’t run conduit during original construction, so the biggest variable is whether we can tie into existing power or need to trench a new line. We quote the full scope up front and the number doesn’t change. Call for a free measure and written price.
Call Ironworks Gate Co. for Gate Motor & Opener Service in Double Oak
If your Double Oak gate is acting up, grinding, stuck, or just not responding, call us at (817) 580-8494. A live person answers, day or night. We’ll get your gate working right, we’ll quote the job before we start, and we’ll back it with a written 90-Day Done Right Promise. That’s the only way we work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Double Oak and the surrounding DFW area with gate motor and opener expertise for over 42 years.